Quick Connect Clamps

(skuhleman) · (skuhleman) **Join Date: Aug 2011** 08-31-2011, 6:25 AM

Any one know where I can find some quick connect clamps? I don't particularly like leaving my speakers on all the time, I would like to find some decent quick connect ones. It would be great if they could swivel as well, but mainly quick connect. Thanks

(joebob) · (joebob) **Join Date: Jan 2011** 08-31-2011, 6:57 AM

You will most likely have to buy speakers with them already installed or fab up something.

(val_cal) · (val_cal) **Join Date: Aug 2008** 08-31-2011, 7:37 AM

NVS makes some nice ones.

(kenteck) · (kenteck) **Join Date: Jan 2005** 08-31-2011, 9:48 AM

whish they proceeded to make these....

(wetsounds1) · (wetsounds1) **Join Date: Jan 2006** 08-31-2011, 11:01 AM

what do you have on the tower now? Pics?

Our new REV speakers are available with our patent pending TC3 quick disconnect swivel clamps. All the wiring is built inside the clamp and you remove one allen bolt and slide out the locking fork and the speaker comes right off. However we are only offering this with the speakers at this time. http://www.wetsounds.com/pages/products/REV8.html

We do offer our TC2 clamps that are here http://www.wetsounds.com/pages/produ...cessories.html

They are $159.99 a pair. They are swivel and quick disconnect. You remove two allen bolts from the side and remove the locking tab and the speaker comes off. There is a cog plate that lets you rotate the speaker and lock it into place. The part that bolts onto our speakers is a flat stainless plate. Since it is flat and has the mounting holes it might adapt to what you have already.

Tim
Wet Sounds

(skuhleman) · (skuhleman) **Join Date: Aug 2011** 08-31-2011, 3:26 PM

I have 2 7.7" bullet lines cans with the DIY Eminence HLCD setup, I know its not the greatest, but it sounds plenty good enough for me, and they work great while riding and floating behind the boat. So right now its just one allen head bolt to pull them off, but its kinda tricky to get to, so I was looking for a quick on/off way of removing them, especially since they arent exactly waterproof like your wetsounds. and believe me if I could afford them I would have them. Thanks for the help, I will have to look into those clamps!