Titan Tower - What size allen wrench?

(billy2603) · (billy2603) **Join Date: Mar 2007** 03-27-2007, 8:32 PM

Does anyone know what size allen wrench is needed to collapse a Titan Tower for storage? I'm not sure if it is a series I or II, but it came on my 2001 Malibu 23LSV. I'll be picking it up tomorrow and forgot to check ahead of time... Thanks for any help!

(nickbot) · (nickbot) **Join Date: Feb 2007** 03-28-2007, 4:16 AM

I have a series I on my boat (not sure if it's the same as yours). anyway, only 1 hand screw and pull the pin...no tools needed.

swass 03-28-2007, 7:13 AM

My Titan I has an Allen head bolt. Sorry - I don't know the size. Does "big" help?

(billy2603) · (billy2603) **Join Date: Mar 2007** 03-28-2007, 7:52 AM

Well, it at least narrows it down to "not small"...

Now, is it "kinda big", "pretty big", "really big", or "F!@#ING HUGE!!!"?

swass 03-28-2007, 8:05 AM

It's kinda hard to say without a frame of reference, but I'd say somewhere between "pretty big" and "really big."

If I had to guess, I'd say 3/8". I don't think it's bigger than 1/2".

(Message edited by swass on March 28, 2007)

(jarrod) · (jarrod) **Join Date: May 2003** 03-28-2007, 8:10 AM

I've got the wrench right here. Not sure what size it is though. Sorry

(mikea) · (mikea) **Join Date: Mar 2005** 03-28-2007, 3:55 PM

my Titan 3 tower uses 3/8" allen wrench at the 4 points where the tower attaches to the boat.

(billy2603) · (billy2603) **Join Date: Mar 2007** 03-29-2007, 8:49 AM

I can confirm now for future reference. Mike and Swass were right, it is 3/8". Which I would say is "pretty big". Thanks for the help!