sub pics

lets see pics of you subs and boxes preferably in malibu's under driver. I want to put in a bigger sub and box but don't want it to stick out and be ugly.

just cut the footpanel out and mount the sub to it... we put a 15" under ours and just had to add a 2x4 to help support the magnet weight works great like that

Tom I don't suggest doing that if you want it to sound even decent.

Heres what i had done on my Sanger V215. This is one of the 15" L7's in my boat

Nice coop!

Not going to help you in a Malibu, but here's mine!

I am in the middle of this project myself, not on a malibu, but it should be similar nonetheless.

I removed the original kickpanel all together. Because the floor in the locker is not flat at that point, I created a false floor with starboard lite. Then I made a box to fit a 12W7 (about 1.2 cu ft.) out of 3/4" high density starboard. First I will install the enclosure to my new false floor, then I will install the sub (since the enclosure mounts to the floor from the inside), and lastly I am making a "grille" or trim panel that will completely conceal the sub but have a custom, OEM looking, patterned cutout to make it acoustically transparent. I haven't decided whether to do this out of aluminum or starboard.

I'll post some pics when the entire install is complete.

Nice Cal, W6 or W7? What amp are you pushing it with?

2 Digital Design 12's

Thanks nu bu. It's a JL 10" W7 being pushed with a JL 500/1 amp.