Articles
   
       
Pics/Video
       
Wake 101
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through April 26, 2009

Share 
Reply
 
Thread Tools Display Modes
Old     (maxx_wake)      Join Date: Sep 2003       04-19-2009, 7:07 PM Reply   
I was wondering how all of you with the 99 to 2001 Supra Launch DD's weight your boat for surfing? I have a 97 SunSport with a ballast system with fat sacs in the rear locker and under the rear seat plus another one up front. Should I fill all three for surfing or just the ones in the back? Will I need another sac next to the engine cover to make a decent sure wave? Also what speed is a good starting point?
Old    pdxWAKE.com            04-20-2009, 6:45 AM Reply   
I would definitely get another sac and some people in that back corner and give it a rip. You will probably need to go about 10-11 MPH. Start at 10 and see if it cleans up and gets a nice face. From there just bump it up a hair and it should clean up. good luck
Old     (rallyart)      Join Date: Nov 2006       04-20-2009, 7:31 AM Reply   
You want more than 1000# plus some people. The list you can put on the boat helps a lot. Fill all three. Diggs gave good advice.
Old     (elbastardo)      Join Date: Mar 2008       04-20-2009, 9:08 AM Reply   
I have a 92 sunsport. ~450 in the back under the seat with a 350 bag next to the engine and everyone in the boat on the same side as the bag works just fine. If you want more weight, I would say add side weight rather than rear.
Old     (wakemikey)      Join Date: Mar 2008       04-20-2009, 11:14 AM Reply   
I put one in rear ski locker, one under rear seat, one large sac on the floor port side in rear and also one sac up front on the port side NOT pushed up to the tip of the bow. 87 SunSport
Old     (maxx_wake)      Join Date: Sep 2003       04-20-2009, 12:26 PM Reply   
I was thinking I would need to add some side weight. It looks like the next project will be to plumb 2 more sacs into the ballast system. I think I will add one on both sides of the engine so I can fill them both for wakeboarding and just one for surfing. Thanks for the advice. I am brand new to surfing so it is just something else to learn about from this forum.
Old     (wakemikey)      Join Date: Mar 2008       04-20-2009, 3:58 PM Reply   
Search SunSport and you will find a lot. Other peoples ballast (talk to Mongtomery his 92 SunSport has an awesome ballast sys.) and many threads. Also stop over to supraboats.com/bbs Greg you too!

Reply
Share 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 11:48 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2019 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us