I have a 2005 Sanger v210. I ran it yesterday and it ran great. I turned it off and when I went to turn it back on, nothing connected to the key switch will power on. I checked 50 amp circuit breaker and it is good. I checked the ignition switch and it is good. There are 3-30amp fuses in the engine compartment that are good. I have checked all of the battery connections to the two batteries and the perko switch connections to make sure they are all tight and clean. I have power in the engine compartment but no power going to the ignition switch. Is there a fuse hidden that I am missing or something else that can cause this. Certain accessories are wired around the ignition switch and all of those work.
|