Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Wakeboarding Discussion

Thread Tools Display Modes
Old     (andrewjet)      Join Date: Jan 2003       10-26-2012, 5:54 PM Reply   
I going to FFFin throw a hammer thru my garage window!! How the hell do you solder these tiny little tabs together?? Im going to break something.

Old     (grant_west)      Join Date: Jun 2005       10-26-2012, 6:29 PM Reply   
Your In Luck I just happend to be lurking here and saw your post.
See if this Video I made helps you out
Old     (grant_west)      Join Date: Jun 2005       10-26-2012, 6:41 PM Reply   
A few tip's
#1 Get a Fiberglass cleaning pen its (in the video) helps prep and clean the surface of the led strip so the solder makes a good solid connection.
#2 Get a Solder Iron with a Very Small (sharp) tip. This helps you NOT over solder the connection and it keeps the heat right where the tip is. If you use a traditional gun the tip is to wide for a 11mm RGB strip and its easy to De-Solder the connection Next to the one your doing.and you could dammage the RGB stip with to much heat from a fat tip.
I use a Weller solder station, It was $120 and its a Great Investment. I also have a Hakko Station they are also great, Again under $150 and well worth it. If you have the right solder gun it makes the job much easyer and the finish product will be better.
Old     (ryanw209)      Join Date: Jan 2010       10-27-2012, 5:50 PM Reply   
Grant obviously you have done this before so help me out a little please. I've looking into doing this in my boat more or less just because I want a fun project and It seems like I can do it for pretty cheap. I have zero experience with LED's but all I know is they don't use much power. If I wanted to run some RGB's around my 11 cup holders and maybe a strip under the helm what would I need exactly besides enough ft of waterproof LEDs. I've seen some kits with controllers and power supplies on amazon for around $30. Can I just buy one of these and then buy another roll of LED's if I need and just keep on stringing them together or is their a limit to what the controller can handle? It seems like these are 12v but they plug into a 110v socket? I can just ditch that cable and wire the controller directly to the batteries/switch etc...? Thanks!
Old     (andrewjet)      Join Date: Jan 2003       10-29-2012, 8:30 AM Reply   
OK guys. That helped. I got 4-strips made this weekend. 2 for my CBR 1000RR and 2- big ones for my amp area for the boat. Luckily they are both red!! Thanks again for settling me down. Jet

Last edited by andrewjet; 10-29-2012 at 8:32 AM.


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 11:04 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us