Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through September 10, 2007

Share 
Reply
 
Thread Tools Display Modes
Old    Bert Melchner (boarder33)      Join Date: Jan 2006       08-13-2007, 7:41 AM Reply   
We just put this system into an 07 X2. We chose not to use the distribution block with the valves, well... because they were out of stock. So we just piped the new tanks into the original vent pipes and ran new vent pipes out the stock location.

Now, I have heard on here that there is a way to extend the fill time on the 07 X2 switches. Right now we only get 6 minutes of fill time and they shut off. We just remove the power wire from the ballast system and it resets but that is a temporary fix.

Any ideas? I've searched but wasn't able to find the original post with the details.
Old    Bert Melchner (boarder33)      Join Date: Jan 2006       08-15-2007, 9:03 AM Reply   
Nothin?
Old    Ron (ronnyboy27)      Join Date: Nov 2005       08-15-2007, 9:08 AM Reply   
there was a thread on here a while ago discussing this. I don't remember the fix but it sounded really complicated. I would just add another pump on one of the axilury switches. (I would have someone do it for me as this would probably be way beyond my ability level.
Old    Jay (ironj32)      Join Date: Jan 2007       08-15-2007, 10:00 AM Reply   
i think you may have to send the "Brain" somewhere to get it adjusted. a buddy of mine is having the same problem with his 07 XStar. he put the additional four sacs in there....they fill up off of the overflow tubes. but basically as soon as the additional sacs start to fill all the pumps time out. the dealer is sending his away to get adjusted. i can try and find out who they are sending it to.
Old    Bert Melchner (boarder33)      Join Date: Jan 2006       08-15-2007, 11:46 AM Reply   
Thanks guys. We have the name of the guy to send it to but didnt want to wait 2 weeks. For now, we're just pulling the positive wire off the ballast system and then replacing it. That resets the system and allows us to continue filling the other bags.

For the x-star... is he having any problems with the water bleeding out through the pumps? We didn't put in the oneway valves because we couldn't figure out where they went. If there were two pumps, one for fill and one for empty, that would be a no brainer.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 7:49 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us