Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through August 06, 2007

Share 
Reply
 
Thread Tools Display Modes
Old    Jack Kloepfer (naptownwake)      Join Date: Jul 2007       08-03-2007, 6:42 AM Reply   
was wondering if anyone out there could share a few pointers for cutting a better wake with an I/O boat (for us less fortunate riders).

do you trim the drive up a tad after plane-out?

do the same weighting guidelines for inboards apply to I/O's?

thanks
Old    Miguel (migs)      Join Date: Aug 2006       08-03-2007, 7:35 AM Reply   
We have a i/o for our slew in foster city that no one will put their nice boat in. (real shallow and real salty water). But we trim up after plane basically until the front end starts bobbing up and down, then we trim down a tad to get it to stop then thats the setting. ONce you do it a few times youll figure out how many seconds to hold it up till its just right, instead of doing it back and forth.
Old    Dante (hal2814)      Join Date: Feb 2006       08-03-2007, 7:40 AM Reply   
We trim at about 1/4 to 1/2 up but it's kind of hard to tell since we don't have a trim indicator. I have a hydrofoil stabilizer on the boat now so planing out can be done at optimum trim. Before that, we planed out at trim full down and then trimmed up until just before we started porpoising. We weight the front a lot more than the back for best wake shape. Most days, our only rear ballast is the crew.
Old    Steve (whirli_7)      Join Date: Aug 2003       08-03-2007, 9:22 AM Reply   
I used to have a 20ft crestliner with a 4.3 i/o. We used to put one fat sac in the bow then trim the outdrive up to 3/4 or so. Made a real nice wake. Infact much nicer then my current mc.
Old    Jack Kloepfer (naptownwake)      Join Date: Jul 2007       08-03-2007, 9:32 AM Reply   
hmm, anyone with an I/O ride WITHOUT trimming up?

(Message edited by NaptownWake on August 03, 2007)
Old    Dante (hal2814)      Join Date: Feb 2006       08-03-2007, 10:35 AM Reply   
I trim all the way down for new riders. It gives a washy wake that's not too big or intimidating. Other than that, NO.
Old    WakePowell Chris (epic1)      Join Date: Oct 2006       08-03-2007, 11:16 AM Reply   
have been riding the same 21 foot mod v wellcraft with a 302 for 11 years now. have never needed to trim. the wake is no comp wake, but, it is peaky and kinda steep. But it is allways firm. with three peeps or 8 it is strong. The only issue is it is touchy side to side. Got to have equal weight on both sides. Never noticed much improvment with trim, but now I will invistagate more.
Old    Jay Nault (ta_barracus)      Join Date: Jul 2007       08-03-2007, 11:45 AM Reply   
I had a 19' Maxum 3 years ago and I always trimmed up just a little bit. It made the wake much less washed out.
Old    Robert Hixson (hixsonaz)      Join Date: May 2007       08-03-2007, 5:38 PM Reply   
we always trimmed up a little more than a 1/4 on the trim indicator. Bow weight makes it a lot easier to stay on plane and keep from porpoising. Too much weight in ours just made it too hard to stay on plane at beginner speeds.
Old    E.J. (deuce)      Join Date: Mar 2002       08-03-2007, 7:23 PM Reply   
Use to always trim up about 1/3 to clean up the wake on the Cobalt. Depending on weight ect....I would just pull up, get to speed and then start trimming until the wake would clean up....bingo.

It actually put out a fairly nice, clean wake.

My wife missed that boat.......
Old    Mikeski (mikeski)      Join Date: Aug 2003       08-03-2007, 11:21 PM Reply   
Big fat sack as far forward as possible. Trim as high as you can without cavitation or porpoising.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 5:48 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us