Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through August 27, 2006

Share 
Reply
 
Thread Tools Display Modes
Old    Russell (wiscxstar)      Join Date: Mar 2002       08-01-2006, 9:14 AM Reply   
The rear bag on the port side of the boat fills by itself. It fills when the boat is underway or if any of the other bags are filling. I have checked the soleniod valve and it is in the correct position, any other ideas? Also my ballast pump system filter leaks ( a steady drip) is this normal or should I put some teflon tape or something similar on the threads?

Thanks!
Old    Brad (bradstang)      Join Date: Feb 2004       08-01-2006, 1:14 PM Reply   
Your value is not operating properly, check the switch located on the value for that sac. Otherwise your value need to be cleaned since it must be open. I had the same problem and the switch on the value was in the open position.

(Message edited by bradstang on August 01, 2006)
Old    Jim G (heem)      Join Date: Dec 2005       08-01-2006, 2:58 PM Reply   
I have the same problem as well. Was told to check the manual switch on the valve, which is fine. Open to other opinions.

I'll check my value as well, is that next to the oscillating warbilator?
Old    bthom (billthom)      Join Date: Apr 2005       08-01-2006, 3:20 PM Reply   
I assume you guys all talking about the same valve as this post:

http://supramoombariders.com/web/forums/32/ShowPost.aspx

The post above was my problem when I had it...
Old    Russell (wiscxstar)      Join Date: Mar 2002       08-01-2006, 6:38 PM Reply   
Brad- do mean "valve", because I am not sure what "value" is unless you mean the position of the switch on the valve...?

Bill- yeah that is the same valve, but what Jim G and I are saying is that we have already checked the switch and it is in the correct position, but the bag still fills... I am going to take it apart and see what happens, but I have feeling I am going to have to replace that valve :-(

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 10:52 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us