Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through August 27, 2006

Share 
Reply
 
Thread Tools Display Modes
Old    Manny (mrm2083)      Join Date: Nov 2005       07-20-2006, 11:44 PM Reply   
When I turn on the engine of my 06 X2 none of the gauges turn on. I havnt used the boat in a month since I was on a trip. They dont seem to be getting any power to them but everything else electrical works fine. I tried the braker and its not that. I was thinking maybe a fuse, anyone know where its located or what else it could be.
Old    darren (bigbird1031)      Join Date: Jun 2006       07-21-2006, 3:21 AM Reply   
the fuse box is located in front of the steering wheel. to access it lift up the flip up back to the seat. you will see a carpeted piece that will fold and then remove. the fuses an wire harness are there
Old    Brian Flick (ai_rider)      Join Date: Apr 2006       07-21-2006, 4:08 AM Reply   
Its not a fuse from what I am being told. This problem is happening with several 06 X2's including my own. It appears that some wiring inside that harness is loose and cutting in and out. I assume just from my own experience with this that your PP(if you have it) still works correct? My guages went out the day I took it home and on occasion decide to cut in and out. Have your dealer look at it and inform Mastercraft. Maybe they will look into it a bit deeper and get everyone a permanent fix to this little glitch. Other than that, No problems and love the boat.
Old    Joe Mitchell (mitchj)      Join Date: Aug 2002       07-21-2006, 7:29 AM Reply   
Mine does the same thing, if I turn it off and on again it rights it self . The sad thing is there is not a person or dealer within 2000 miles that would have a clue or a tech who is capable of fixing it. Mine has done it from day one .
Old    Andrew Davis (c640947)      Join Date: Jan 2005       07-21-2006, 10:18 AM Reply   
I have been having problems with my perfect pass, but my guages are working fine and always have. My perfect pass randomly decides not to engage and even though I have tried to adjust settings, it is not smooth at all controlling speed. One day I came out and the clock was reset, the stereo remotes weren't working and the PP started doing that. I wonder if it was a system wide electrical problem....
Old    Manny (mrm2083)      Join Date: Nov 2005       07-21-2006, 10:42 AM Reply   
I have the mastercraft cruise control and thats not working either.
Old    Joe Mitchell (mitchj)      Join Date: Aug 2002       07-21-2006, 12:17 PM Reply   
My M/C CC works perfect it just took some time to figure it out after having PP in the last boat .
Old    Jeffrpod (jeffrpod)      Join Date: Jun 2005       07-24-2006, 10:20 AM Reply   
When my 06 X2 was delivered, a breaker would trip when I flipped the Crts Lights switch to the down position and another break would trip if I flipped the Anc/Nav Lights switch to the Up position. The dealer since fixed it, but I don't know what they did.

Not to side track the thread, but anyone else with an 06 X2 notice that the front portion of the driver's side Kick Panel is loose? I can reach my hand between the fiberglass and the panel and wiggle it around. Is it mine or are they all like this?

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 8:12 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us