driver's kick panel

Does anyone know how the driver's kick panel comes out of a ski brendella? would it have to be cut out with a saw?

On most boats it is glassed in I think. If your adding a sub you will need to make the cutout with a saw. Can you post pics and more about what you need to do.

Ok no problem, Let me see, get a 10 mm and a flat head screw driver remove the heater tube, and the fuse pannel, then Place this

where the kick pannel sits light it and the and run

the kick pannel should be removed when your done

Thanks Grant! you're the best!
I'll take some pics from I believe the panel is glassed in.

R: thats ok. This one was glassd in and it didnt stand a chance,

I used one one bomb to blow it open and a 2nd one to clear the left over's

(Message edited by whitechocolate on March 22, 2005)

(Message edited by whitechocolate on March 22, 2005)

I have a collection of photos of how I removed the foot rest from Jasons 209. Im sure yours is not the exact same but you can get the idea.
www.svtsupercharged.com/gallery

click on jasons boat