Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Wakeboarding Discussion Archives > Archive through February 04, 2005

Share 
Reply
 
Thread Tools Display Modes
Old    sublimed            01-29-2005, 9:24 AM Reply   
Hey guys,
I got a pair of 04 Liquid Force Transits. Been using it for around 6 months now and there is rust forming on one particular rivet used to hold the lace loops on the overlay.
I ride in salt water, but rinse off after each session with fresh water. But the point is...all the other rivets are perfectly fine expect for just this one particular rivet. It seems to be made out of a different material from the others.
Now, the whole head of the rivet is totally covered with rust and the rust has goten onto the overlay, causing the overlay to be stained by the rust.
Anyone ever had the same problem or something like that? And any idea if LF would cover this under their warranty?
Old    canadian_shred (wes_can_riders)      Join Date: Feb 2004       01-29-2005, 12:46 PM Reply   
first thing I was going to tell you was wash this off with fresh water, but you said you did that... so my only suggestion is to take it to the LF dealer and ask them about it... if you got it from a shop just take it back because if you have only had them for 6 months you should be covered
Old    Thane Dogg (thane_dogg)      Join Date: Jun 2002       01-29-2005, 1:52 PM Reply   
yeah, get 'em warrantied. I doubt you could fix that problem yourself. Not a huge problem but still sucks.
Old    sublimed            02-02-2005, 4:26 AM Reply   
my dealer came back to me with liquid force's reply on my transits. I was told that since the rivet does not directly affect the function of the bindings. they will not make any effort to replace or warranty them.
this is such a disappointing reply from LF.

for one, they are just pushing the problem away, the rivet will rust further and will soon break off. won't i have to raise the problem again?

but what really disappointed me is the fact that this is clearly a manufacturing fault. As only 1 rivet is rusting but why not the others? It is clear that the material used for that particular rivet is flawed.

i live really far from the US and its always a big trouble to get equipment replaced here. i guess the further you are...the less they value you?
Old    C.I.E. J-Rod (jarrod)      Join Date: May 2003       02-02-2005, 6:17 AM Reply   
Wait a month and break it yourself.
Old    wickedwake            02-02-2005, 6:53 AM Reply   
What Jar said, break it off and send it back! (Demand 05's)
Old    sublimed            02-02-2005, 7:02 AM Reply   
guys, from what i read on the regular post here, its seem that you guys get ur damaged equipment replaced with little or no hassel at all.
however, i don't see the same happening here. if the main office at liquid force can give such a disappointing reply, i forsee a hard time getting anything replaced.
so much for all the claims on the website on support and warranty...bah...
Old    wickedwake            02-02-2005, 7:21 AM Reply   
Not encouraging dishonesty or anything but a freind tore a seam on his 04 transits and they were replaced by 05's in a few days....just a thought. Only suggesting this b/c LF usually has awsome customer service and will bend over backwards for the customer (in my experience anways)
Old    sublimed            02-02-2005, 7:39 AM Reply   
well, i hope they value their overseas customers as much too. i've always heard good things about their coustomer service, until now when i have to experience it myself.
Old    erik (erik)      Join Date: Feb 2001       02-03-2005, 5:36 AM Reply   
good luck with that. i broke 2 trips one summer and lf did not want to replace either of them. no sliders, nothing. broke them on a 911 and a s-bend. never going back to lf! just my $0.02
Old    Bruce Banner (breadbutta)      Join Date: Dec 2003       02-03-2005, 1:41 PM Reply   
If LF won't replace/repair at no cost you can easily drill the rivet out and replace with stainless.
Old    sbvfive            02-03-2005, 4:09 PM Reply   
Email don or josh at liquid force directly. Forget going thru a shop, too much gets lost in translation. Josh is the customer service rep. I broke a pair of 04's twice within a few weeks, and to make a long story short, I ended up with two pairs of replacements for my troubles.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 4:34 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us