Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through August 27, 2003 > Archive through June 22, 2004

Thread Tools Display Modes
Old    captfaceplant            05-23-2004, 2:39 PM Reply   
Do any of you Mastercraft X-10 or Maristar 210vrs owners have Perfect pass? If so where is the new paddlewheel located? Any help would be greatly appreciated.
Old     (blacter)      Join Date: Jun 2003       05-23-2004, 6:58 PM Reply   
On my 2004 X10 it's located just forward of the drain plug in the center of boat. You can reach it through the center hatch.
Old    captfaceplant            05-23-2004, 8:14 PM Reply   

Does it pretty much work without a glitch at that location? And is it slightly of to one side or is there a flat on the centerline? Thank you so much for the info!!!
Old    sonicr1            05-24-2004, 6:55 AM Reply   
I don't think the stock location is very good. When you go over wakes I see my PP get confused--the speed reading goes up and down fast and the PP tries to adjust the throttle to maintain the speed reading even though the actual speed is pretty constant. I would suggest a little further back, if it is possible.
Old     (ktm250)      Join Date: Jan 2003       05-24-2004, 9:03 AM Reply 0

Half way down you will find the referrence to the X10 issues with paddle wheel location.
Old    captfaceplant            05-24-2004, 12:19 PM Reply   
I have thrown out several inquiries, and once I find out the proper location I'll post some pics. Thanks for all the advice thus far!!
Old    oshensurfer            05-24-2004, 8:21 PM Reply   
PP will tell you exactly where their engineers suggest putting it. Give Randy at PP a call and he'll get you in touch with an engineer who will give you the best spot.
Old     (blacter)      Join Date: Jun 2003       05-24-2004, 8:42 PM Reply   
My X10 was built in April and the paddlewheel was mounted forward of the center drain. The boat is so new that I've only taken it out boarding...and I noticed that there were times when the PP gauge wouldn't show the speed at all. When I got home I cleaned the paddlewheel assembly, figuring that was the likely culprit. Now I wonder if I was seeing a syptom of poor paddlewheel placement.
Old     (ktm250)      Join Date: Jan 2003       05-25-2004, 6:03 AM Reply   
This link should help.
Old    captfaceplant            06-18-2004, 3:25 PM Reply   
Here are a few photo's of the location that looks like it will work best for my boat. Let me know if anyone see's any potential problems.
Paddlewheel Location
Old    captfaceplant            06-18-2004, 3:28 PM Reply   
Paddlewheel Location


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 12:08 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us