Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through August 27, 2003

Share 
Reply
 
Thread Tools Display Modes
Old    williemon            08-19-2003, 10:11 PM Reply   
Im going to build either a pylon, monkey bar or simple tower for my I/O. Im looking to use aluminum or stainless tubeing. As I check prices for this stuff, what wall thickness for the tubeing should I look for and what diameter tubes?
Old    Bill Bierbower (monstertower)      Join Date: Mar 2003       08-19-2003, 10:30 PM Reply   
Check out www.diyTower.com for some great technical links. It will be easiest to get Schedule 40 Aluminim Pipe and any local supplier of alumimum pipe can set you up.

Depending on if you use stainless or aluminum, the wall thickness will be between .060 and .188. The stainless will be thinner but heavier than the equivilent strength of 6063-T54 or 6061-T6 aluminim. Post pic's of your new tower!
Old    Bill Bierbower (monstertower)      Join Date: Mar 2003       08-19-2003, 10:38 PM Reply   
OK, You got me on a technical rant now!

There are two parameters which are called Moment of Inertia and Section Modulus that define how well a beam can carry a load and how well it can resolve stresses. Both favor larger diamter tubing (taller beams) by an exponential factor, so go with larger diameter first, then greater wall thickness.

Professor Bill

(Message edited by MonsterTower on August 19, 2003)
Old    williemon            08-20-2003, 2:57 PM Reply   
Thanks for the info. Im probably going to go with a pylon or monkey bar just for simplicity. Then, as the mood strikes, add support bars for the rear and front.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 5:44 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us