Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through July 08, 2003

Thread Tools Display Modes
Old     (jro)      Join Date: Sep 2002       06-24-2003, 1:54 PM Reply   
Well I finally got some Tower speakers and am looking to get a second amp to run it. HOWEVER, since that will have to wait awhile (Funds and wife), I need some advice on utilizing my current amp and on a new amp for the tower. Here are some specs for the amp and speakers...

Amp: Kicker IX406 (All RMS)
40w x 6 4ohm
55w x 6 2ohm
115w x 3 bridged mono 4ohm

Speakers: 4 stock JVC cabin speakers
1 10" Kicker comp sub
4 6x9 tower speakers (Clarion Power series)

Currently I am running the sub bridged on 2 channels and am running the cabin speakers in parallel on 2 channels. I took out the second sub that I had to make room for the tower speakers. I was thinking of daisy chaining the tower speakers 2 in series and that pair in parallel for a 4ohm load. But it will only give each speaker about 30w (115w/4). Can anyone think of a better way to wire these speakers up? I am even willing to run the cabin speakers off the deck. I know I won't get a whole lot of sound out of the tower yet but need to make due for now.

PS This amp is definitely underrated wattage wise, these are the printed RMS wattages. Thanks for any help
Old     (colorider)      Join Date: Jun 2001       06-24-2003, 8:47 PM Reply   
All depends on what you want to achieve. If you want to hear the tower speakers while riding, then 30 rms is probably not going to be enough and you are going to have some foul distortion when trying to get to those volumes. IF you want all around good sound while cruising, that wiring will work. If your goal it to hearing them while behind the boat, Run the cabin speakers off the head unit and give the tower and sub the rest of the power/channels. Just be aware of your ohm loads on the amp. From what it looks like, you have a good comprehension about ohms/series/parallel, so it should not be a problem.
Old     (jro)      Join Date: Sep 2002       06-30-2003, 10:53 AM Reply   
Well I went ahead and hooked the tower box up to 2 of the amps channels bridged together and daisy chained them to a 4 ohm load. Well all I can say is DAMN! Either the box is incredibly efficient or the amp is very underated. You can hear it loud and clear at 80 feet back with no distortion. Thought I would pass this along so others who are worried about not having enough power can stop. Props to Kicker and wetbox!


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 9:52 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us