Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through July 08, 2003

Share 
Reply
 
Thread Tools Display Modes
Old    sandman            06-17-2003, 12:25 PM Reply   
I bought a Straightline-Launch Pad 1000GPH pump last season. Probably used it between 10-15 times. Tried it for the first time this season and noticed it was only pumping about 250GPH or so. It was fully submerged and not sucking any air into the line. I definately will not buy another one of their pumps. Any other recommendations?
Old    NoneYa (noneya)      Join Date: Apr 2002       06-17-2003, 2:16 PM Reply   
I've used my straightline alot more than that w/ no probs, have you opened it up and made sure its not clogged? I would also contact straightline or whoever you bought it from, I've gotten great response directly from straightline.
Old    troutbay            06-17-2003, 3:23 PM Reply   
Open the pump and look at the plastic impeller. If the vanes are chipped it will reduce the flow rate. New plastic impellers cost about 5 cents. (CDN).

If you have trouble finding them email me, I have about a dozen of the impellers for the straightline pumps.
Old    sandman            06-17-2003, 4:28 PM Reply   
First thing I did was open it up. Impeller looked fine and no debris. The motor just doesn't sound right when turning. I will take it back to where I bought it to see what they have to say. Now if I can only find my reciept.
Old    river_rider            06-17-2003, 8:25 PM Reply   
Kind of off the subject, but some usefull info for people with pump probs. I noticed my plug started rusting and I would have to wiggle the crap out of it in the socket to get it to work. I opened it up and realized thier is a fuse on the inside. Changed the fuse and its good as new. Now if I can get it to stop leaking.
Old    Bennett (wakehype)      Join Date: Dec 2002       06-18-2003, 12:05 AM Reply   
Bryce: You know a Debbie Olson or Cheryl Chedester that works at Intel?

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 3:35 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us