Can I pull up my epoxy'd transponder?

endo 05-20-2003, 6:55 PM

Is there any way I can get my depthfinder transponder off of my hull? I Used slow cure epoxy to attach it, and now I want to move it. Thanks

(liveoz) · (liveoz) **Join Date: May 2002** 05-21-2003, 7:53 PM

You can always remove epoxy with heat. If you can get it hot enough without damageing the hull or the transponder, it will come right off.

(peter_c) · (peter_c) **Join Date: Sep 2001** 05-21-2003, 9:37 PM

I used a hammer to remove mine. It is fun anytime you get to hit something with a hammer. The transducer popped right out and the glue stayed. Then I took the new transducer and glued it in the exact same spot.

(salty87) · (salty87) **Join Date: Jul 2002** 05-22-2003, 9:49 AM

if you didn't prep the hull really good when you put it in, you might be able to lift an edge and peel it back. get a screwdriver under it and twist the screwdriver to lift it up.