Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    Ally (alcarlaw1)      Join Date: Jun 2007       06-20-2013, 1:15 PM Reply   
Thinking on making a slide in air dam for my Sport Nautique. Curious as to whether anybody has made one. What material did you use, acrylic, HDPE etc? Any pics appreciated
Old     (CarZin)      Join Date: Feb 2011       06-20-2013, 1:30 PM Reply   
My Enzo has an Acrylic airdam. Do you want me to take some pictures of it this weekend if it would help?
Old    Andy Graham (ottog1979)      Join Date: Apr 2007       06-20-2013, 1:36 PM Reply   
I have a Sanger V210 that has cushioned sides in my walk-through. I didn't want to mess up the cushioned vinyl by taking on some slides for the plexiglass. So, I just came up with something very simple. It works great.
http://www.wakeworld.com/forum/showthread.php?t=749006

Grant West used channels:
http://www.wakeworld.com/MB/Discus/m...921/44671.html
Old    Jon (supersonicmi)      Join Date: Sep 2005       06-20-2013, 2:20 PM Reply   
I have done this too, very easy. make a mold out of cardboard and go to your nearest plastics shop (such as TAP Plastics) and they will cut and sand you exactly what you want... it isn't very expensive either.
Old    Mahogany Lover (RonBurgundy)      Join Date: Jun 2012       06-20-2013, 2:34 PM Reply   
i had a local company make one.....with measurements they will make you one and in a ton of shapes....give them a call - Precision Plastics in Clovis, CA
Old    Ally (alcarlaw1)      Join Date: Jun 2007       06-21-2013, 12:26 AM Reply   
I have the facilities to make one myself - just curious as to how people have manufactured theirs and what material was used. Any pics would be useful. Thanks
Old    Harold Hemming (h20king)      Join Date: Dec 2009       06-21-2013, 6:31 AM Reply   
yep I used some 1/2" aluminum channel for the guides/ mount. Had a local plastic shop cut the wind dam from tinted acrylic and used some Velcro loop to line the channel looks just like a factory install
Attached Images
   
Old    Joe Condon (jcon44)      Join Date: Aug 2012       06-21-2013, 8:24 AM Reply   
i made one for my Bu because it didn't have the original when I bought it. The channels were already there so i just made a cardboard cut out of the space and cut up some plexi to fit. I bought a 4x8 sheet of tinted plexiglass online somewhere, enough so i would have extra if i needed it. I may make another since I've already scratched mine. It was really easy and you can cut it with woodworking tools, it makes a huge mess so be warned. I may have some pictures but it looks just like the stock ones expect i didn't add the hole/handle as i didn't see the point.
Old     (CarZin)      Join Date: Feb 2011       06-21-2013, 10:13 AM Reply   
Harold, your installation looks exactly like my Enzo factory with the exception that Centurion added a fuzzy material inside the channel to protect the acryllic from being scratched. Great job.
Old    Ally (alcarlaw1)      Join Date: Jun 2007       06-21-2013, 2:13 PM Reply   
H20King, spooky, just ordered some tinted acrylic and 1/2 anodised U channel today.... Guessing it may look similar
Old    Harold Hemming (h20king)      Join Date: Dec 2009       06-21-2013, 6:42 PM Reply   
Carzin my boat is a centurion so I just copied what the factory did. I also lined the inside of the channel with the fuzzy side of some Velcro so it looks factory and does not scratch the wind dam.
Attached Images
 
Old    Trayson Harmon (trayson)      Join Date: May 2013       06-21-2013, 6:58 PM Reply   
Admittedly, my boat is 2 decades old, but it just uses vinyl. It attaches with snaps, just like the bow cover. I think it has like 9 to 12 total snaps and really doesn't take very long to throw on. Big plus is that it takes virtually no room to store.

A bit old school, but works well.
Old    D Dub (MantisTaboggin)      Join Date: Jun 2010       06-22-2013, 10:45 AM Reply   
Name:  image.jpg
Views: 555
Size:  61.0 KBHere is mine. Had a plastic shop cut the piece and they made the rails too. Love it!
Old    Trayson Harmon (trayson)      Join Date: May 2013       06-22-2013, 3:59 PM Reply   
Quote:
Originally Posted by MantisTaboggin View Post
Attachment 30522Here is mine. Had a plastic shop cut the piece and they made the rails too. Love it!
Okay, you got me, that just looks badass with the stickers.

I have a playpen though, so if did one, it would not go to the floor but would have to have a stop just so it wasn't resting on the cushion... Hmmm
Old    D Dub (MantisTaboggin)      Join Date: Jun 2010       06-23-2013, 12:42 PM Reply   
Thanks! Stickers help the dog realize it is in and keeps her from walking into it.
Old    Ally (alcarlaw1)      Join Date: Jun 2007       07-06-2013, 12:02 PM Reply   
Finally got round to making mine. 12.5mm U section, 5mm perspex, a tin of paint, a router and a heat gun. Prob took 2-3 hrs in total




Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 7:56 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us