Sanger V237 comes with a 3 blade? I know that a bunch of us Axis guys are now using the new Acme 2315 prop. Guys are planing with 4,000+ lbs of ballast plus crew with no problems so sufing with the 2315 is easy on an Axis. Cruising topspeed is still around 39mph...if you needed to go that fast. I had the OJ 5-blade and it had it's pros and cons compared to the 1235. The 5-blade was very close to same holeshot as the 1235 but the 1235 had a tiny bit more. The 5-blade was noticeably more quiet in the cabin and less overall vibration. RPM's were about 300 lower with the 5-blade vs. the 1235. The 2315 is the same RPM as the 1235 which is stock on the Axis, however, Axis do also come with the 5-blade...just depends on the dealer. I personally think the 2315 is the best prop by far for the Axis but you should call Acme and I'm sure they can determine if it's a good option for the V237.
Last edited by you_da_man; 07-01-2013 at 1:55 PM.