After reseaching for weeks I dove head first Ito my first install now I have a few question.
1. What tool do i need to cut 2 gauge wire.
2. I have one battery now and adding a perko. So the power wire that comes out of the floor now goes on the common post of the perko along with the power for the accessories and finally the power for the distro block for the amps.
3. The power wire that comes out of the floor has one of those ends that clamps around the big post of the battery. That won't work with the perko so do I cut that end off and clam a new 3/8" fitting(see picture below).
4. What size speaker wire for REV 10s. The ones already in the tower look real small.