Originally Posted by RonBurgundy
I had a bow filler cushion made for my Sanger v215 and I fear it may be missing something. It fits tightly between my existing bow seats, but sits on such a small lip of fiberglass that if you sit on the cushion it can push to either side by about 1/2 inch and it falls in…..hopefully this makes sense.
Looking for pictures of the bottom of your filler cushion if you have one so I can make sure I’m not missing anything.
If its moving around a 1/2", I wouldnt consider that being a tight fit. I made the board for my bow filler cushion, and had the upholstery guys upholster it. It only has 1/2" lip of fiberglass on each side, if that and it has never slipped off and fell in. Maybe post up a picture of what you have right now and see what others think you could do differently.