Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old     (Iceberg)      Join Date: Dec 2011       05-11-2012, 6:06 PM Reply   
I finally decided to fix the spider cracks around the rudder on my boat. A previous owner had gently hit something with the rudder, just enough to crack the gel coat, but not enough to damage the fibreglass or bend the rudder.


Yesterday I ground out the cracks with a Dremel tool with a diamond tip bit.


I used about 1/2 oz of white with 2 small drops of black pigment. The MEK was added and mixed at 2%. The repair was covered with plastic to cure. The colour match is very close to the original sanded gel coat, but is lighter to the discoloured hull.


The first layer of gel coat went on last night. Working upside down on the bottom makes for a rough first coat. After sanding today I applied the second coat to fill a few of the low spots. Sanding from 100 grit to 220 grit for the first knock-down. Tomorrow I will use 220-1000 for the final. Following that I will buff it out. Of course, the sanding will come after I return home from a day on the water. Why waste a good morning sanding...

 
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 1:30 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us