Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    Alex (alex_hunter)      Join Date: Oct 2009       03-29-2012, 7:23 PM Reply   
I'm going to have 5 amps, 1 for sub, 2 for tower speakers and 2 for in boats. I'll be running them off a WS-420 EQ. The sub amp is straight forward, 1 set of preouts. The tower speaker amps are 2 SYN-4s bridged, so 2 sets of preouts, 1 for each. How do you hook them up, is it as simple as a RCA Y adapter. And the inboats will be a SYN-4 and SYN micro, which will be 3 sets of preouts. How is this connected to a single preout on the EQ, a Y adapter hooked up to a Y adapter???
Old    Shawndoggy (shawndoggy)      Join Date: Nov 2009       03-29-2012, 8:50 PM Reply   
That is the one weakness of these arc based amps that they don't have an rca pass through.



http://www.darvex.com/store/pc/Sting...ts-121p529.htm
Old    Russ Constable (Midnightv10)      Join Date: Feb 2012       03-29-2012, 9:13 PM Reply   
Should only need 1 set of Y's though for the in boat amps.. you should be able to run 1 side of each Y to the Syn Micro and the other side of each Y to the Syn 4.
Then set the input on the Syn 4 to stereo. Signal will go to all four outputs. You loose fading capability that way but you cant fade the 420 anyway...
Old    Alex (alex_hunter)      Join Date: Oct 2009       03-29-2012, 10:00 PM Reply   
Ok, I'm a little lost. For the in boats SYN-4, there will only be 1 set of RCAs, a left and a right? Which side do they go to, front or rear? Or does it matter? And then switch both front/rear to stereo?
Old    Russ Constable (Midnightv10)      Join Date: Feb 2012       03-29-2012, 10:21 PM Reply   
Yes, 1 set of RCA's coming from the 420 - then at the amps end you would have a Y adapter - 1 Female to 2 Males attached to each of the right and left sides of the RCA. now you have 2 rights and 2 lefts. Plug one side of each Y into the appropriate side of each amp (use the front inputs on the Syn 4, the syn micro will only have 2 inputs). The input mode switches (front and rear) should be set to "stereo" and the source select switch should be set to "2 channel".
Old    Alex (alex_hunter)      Join Date: Oct 2009       03-29-2012, 11:17 PM Reply   
Thanks a lot Russ.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 3:12 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us