That's an awesome looking rig. Don't listen to all the crap you are going to hear about the 6.0. I agree with riverside. The first thing you need to do is get an Edge insight to monitor ECT and EOT. I also have the EGT probe installed to monitor that temp as well. The second thing you need to do is order a coolant filter from dieselsite.com. Very easy to install.
You can make the 6.0 very reliable witha few other mods however you need to be precise in what you do first. Everyone is going to tell you the head gaskets are crap. If you drive it nice and keep the programmers out and monitor your temps so you know when you are having an oil cooler failure you will be fine. And you will have an oil cooler failure. If you can manage to get the ford gold coolant out and replace it with an ELC you will be eliminating slot of the problems that exist with this engine.
I prefer www.thedieselstop.com
for info on the 6.0 but frequently look are powerstroke.Org for info as well. Both are great resources for these motors. The great thing about this motor is there are slot of parts available for it.
I think it is a fantastic looking truck.