|
So I have been trying to figure out what to do about my lack of tower navigation light. I was kind of shocked at the prices of some of them. And I couldnt do the lighted tow spool due to my tower. So I was digging through my garage and found the old light pole that came with my boat and an old speaker clamp from DIY Wake. So I drilled the center threaded hole out of the clamp to 7/8" and cut my old light pole down to 12 inches. I used some epoxy to secure the pole to the clamp and this is what the finished product is. The wires will run through the center of the clamp and into the tower so no wires are exposed. Just a cool idea i figured to share with you guys,
|
Threaded Mode