Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Wakesurfing

Share 
Reply
 
Thread Tools Display Modes
Old    Sixx (sixx352)      Join Date: Sep 2008       02-03-2012, 4:11 PM Reply   
So I got to check out the RZ3 today at Lucky Peak in Idaho and it was the first run for the boat with this shop. Has anyone had a chance to play with this wave? We tried the stock setup and it wasn't that great even with the trim tabs which is not unusually for any boat stock. Then we added a 450lbs in the side in front of the back port locker and it helped it out but I still think the RZ2 wave is better so far. The boat shop owner said it might have the wrong prop on it and I think Tige told him to try the 537 prop. It had a bad rooster tail for awhile but we got most of it gone with some tweaks but still wasn't there like I thought it should be. I'm sure more people in the boat will be better there was only 4 of us testing it out. Hard to get more people to go with 40 air and 38 water temp with a wind chill lol. I'm sure I will be able to figure it out but just thought someone else could help me out on it. It also had a ridge right in the middle of the wave almost like a Epic wave but not as bad as that Epic wave. Overall the boat itself is amazing love the style of this one in Boise just need some wave help right now. I'm sure someone that was with us had pics or video of the wave but I was either in the water getting blue balls or covered up like a eskimo in the boat.
Old    Johnny (guma)      Join Date: Sep 2009       02-03-2012, 9:02 PM Reply   
What was the stock ballast setup? The have 3 different ballast configurations from the factory.
Old    Robert Garcia (ragboy)      Join Date: Aug 2007       02-04-2012, 10:20 AM Reply   
If it is the pro setup, 2300 lbs of ballast, fill up surf corner all the way, and maybe add the sacs to surf side like you did, fill up front on surf side, and then fill up the other side corner til you are about at 7 deg list at rest. Ours is being built, so we don't have tons of experience yet, but you cannot weight this boat like the RZ2. The RZ2 wants the rub rail buried, this boat doesn't like that much list, and it kinda goes against what you are probably used to, I know it did for me. Once we got it dialed, the wave was a great shape and according to RJ and Dennis had "ridiculous" amounts of push.

Once we get ours and play with it more, we will be able to give more feedback.

The RZ4 also needs weight on the opposite side, less list than the RZ2. Hope that helps.
Old    Duffy Mahoney (duffymahoney)      Join Date: Sep 2008       02-04-2012, 2:08 PM Reply   
Anyone ever install a sort of list gauge?
Old    Dennis (dennish)      Join Date: May 2005       02-04-2012, 4:48 PM Reply   
iPhone has an app for that.
Old    Duffy Mahoney (duffymahoney)      Join Date: Sep 2008       02-04-2012, 5:25 PM Reply   
any actual gauges? I think that would be really cool and would totally help with keeping a consistent wave! I have an old toyota 4 runner that had one on the dash. I have never seen another like it though.
Old    Brandon Moore (ynoino)      Join Date: Aug 2011       02-04-2012, 5:57 PM Reply   
Used to use these on sailboats a lot. Lev-o-gauge They just stick on where ever you want to put it.

http://www.suncompany.net/prodList.php?subCat=16

West Marine has them on their site too.
Old    Dennis (dennish)      Join Date: May 2005       02-04-2012, 6:13 PM Reply   
The nice thing with the iPhone app is it gives you a digital reading and front to back slope as well.
Old    Duffy Mahoney (duffymahoney)      Join Date: Sep 2008       02-04-2012, 6:33 PM Reply   
Yeah a digital gauge that isn't an iphone would be sweet!
Old    Robert Garcia (ragboy)      Join Date: Aug 2007       02-04-2012, 6:47 PM Reply   
This is what I use, it show on all axis, I set it on the fiberglass near wear the ski tow on a tig would be.

http://plaincode.com/products/clinometer/

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 7:11 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us