Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Wakesurfing

Thread Tools Display Modes
Old     (Tehanw215)      Join Date: Jul 2011       10-14-2011, 9:05 AM Reply   
will the switch blade work on the sanger v215?
Old     (duffymahoney)      Join Date: Sep 2008       10-14-2011, 9:13 AM Reply   
It should work on any boat. But you may need to beef up the transom.
Old     (BoardCo)      Join Date: Mar 2010       10-14-2011, 9:33 AM Reply   
A Sanger v215 should be able to support a Switchblade without much problems. We have not installed one on that particular boat, but I am familiar with Sanger boats and their hull design is strong enough to support one, no question. As long as it will fit below the swim deck and there aren't any problems with misc things such as exhaust placement or tim tab setups it should fit. If you have a Hydraulic trim tab it will probably have to be removed to install a Switchblade. One thing I do have to advise is that adding a Switchblade to your boat will void any remaining hull warranties - typically not a major concern, but something you should be aware of.

We have installed and worked on more Switchblades than anyone in the industry except for Switchblade themselves. Any of my guys here would be happy to help you with any questions you have. A Switchblade can be a phenominal investment for wakeboarding and surfing depending on your needs and what your goals are.

Good luck and keep shredding!

Old     (duffymahoney)      Join Date: Sep 2008       10-14-2011, 11:33 AM Reply   
Mitch I sent you an email.
Old     (h20king)      Join Date: Dec 2009       10-14-2011, 1:52 PM Reply   
The switchblade is amazing and should fit A v 215 with no problem.Manual or hydraulic trim tabs can be retained but if you have a single ram system you will need to change to a dual ram system .I retained my factory manual trim plate and adjuster arms by welding two studs to the switchblade mount.To retain a hydraulic trim system the switchblade mount would need a couple wholes drilled and taped in the mount .I did my own install it was easy and strait foreword but plan on a whole day for a clean install
Attached Images
Old     (jdjjamesz)      Join Date: Mar 2008       10-15-2011, 10:37 AM Reply   
I think the hull is to low on that boat..
Old     (Tehanw215)      Join Date: Jul 2011       10-17-2011, 7:50 AM Reply   
Hey James have you ever surfed behind the sanger v215? If so what do you think of the wave, and can it compare to the centurion waves?
Old     (BoardCo)      Join Date: Mar 2010       10-18-2011, 9:21 AM Reply   
Hey Duff,

Sorry I never got your email. You can send me a message to my account on wakeworld or email me at Thanks!

-Mitch at BoardCo


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 1:00 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us