Sorry to hear about the trouble you are having mounting the clamp without slipping. Unfortunately, tubing size is not always the exact same throughout a tower; there are tubing size discrepancies throughout the tubing of every tower; I have personally seen up to 1/8". I have 2 options that can solve your slippage:
1. move it to a different spot that has a larger tubing diameter (usually not desirable).
2. wrap one time electrical/duct tape around the tubing (this will usually get the job done)
Bullet Lines/Krypt Towers
Last edited by bulletlines; 04-18-2011 at 3:52 PM.
Reason: Spelling error