Anyone know how to identify the particulars about a prop. I think mine was replaced right before I bought it 10-some years ago so its probably not the standard size/pitch that came on 99 x-stars.
On the end of the hub next to the prop nut are the numbers 14 , 204 ( or maybe 20A) , cup, and 1 1/8
Alongside the length of the hub are are three tick marks ''' , 17, and 130 but the three is really off centered below the 10 and then 99.
So the 1 1/8 is the shaft size. I *think* that its a 14X17 OJ. 99 is probably the year of manufacture.
Reason I ask is because I'm thinking of going with an ACME 1235 but I'd like to see if I can sell my old one. I don't really need a spare since this one has lasted nearly a decade without a ding in it but I want to be able to identify it correctly on ebay or whatnot.
Also curious what folks would think a used 4 blade inboard prop would be worth in good condition.
Last edited by big_poppa_pump; 04-14-2011 at 12:55 PM.
Reason: more info