Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    RidinDirty            06-02-2010, 12:44 PM Reply   
I have to replace the center ballast bag on my 2001 xstar. There was a crack in the connector elbow for the bag and the hose. While taking the bag out I noticed that there are three connections, which I assume are the intake, drainage, and overflow. I was looking at the fly high center sacs as a replacement, but I could not tell if they come with the three connections.

Will I have to modify the flyhigh bag in some way or should it fit right in to the existing system?
Old    Dave Kiehl (dave27)      Join Date: May 2005       06-03-2010, 7:58 AM Reply   
Call wakemakers, they are helpful and that is what they do for a liviing.
Old    Chasin7 T (chaser)      Join Date: Sep 2006       06-03-2010, 12:25 PM Reply   
If it's stock, the center bag drains and fills from the same hole. It has two overflow/vent holes. Not sure why. I replaced my KGB and just used one overflow/vent line. No difference in performance. I'll try to find the bag I used. Did a lot of searching around for the best size to get the most out of that space. I think I found a good fit for like $75 on sale. I'll do some checking.
Old    Andy Graham (ottog1979)      Join Date: Apr 2007       06-03-2010, 2:07 PM Reply   
Dan,

I have to run and can't find it right now, but I had the same elbow connector crack that you did and managed to get it fixed so it doesn't leak a drop. The trick is to cut the elbow out with a razor blade and replace it with a plastic thru-hull fitting using 3M Marine adhesive. Much easier and less costly than buying a whole new sack. Mine's been water-tight for a year now. Later today, I'll find the thread & post up.

Last edited by ottog1979; 06-03-2010 at 2:07 PM. Reason: add
Old    Chasin7 T (chaser)      Join Date: Sep 2006       06-03-2010, 2:10 PM Reply   
Here is the one I used. Fits really good too.
http://www.amazon.com/Straight-Line-.../dp/B001IYHH3A
Old    RidinDirty            06-04-2010, 2:40 AM Reply   
thanks for the help guys. Andy, that would be great if you could post the link to that thread.
Old    Andy Graham (ottog1979)      Join Date: Apr 2007       06-06-2010, 1:37 PM Reply   
Sorry for the delay. Here it is:
The problem: http://www.wakeworld.com/forum/showthread.php?t=717486
The solution: http://www.wakeworld.com/forum/showthread.php?t=723963

Just for fun, I'll post a few more pics of the water test. I don't have any pictures of it, but I did one more step after this. I cut off the thru-hull and then threaded an albow that I bought at Home Depot so that the new fitting was closer to the old one. All & all, a piece of cake. Hope this helps!
Attached Images
  

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 1:33 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us