Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    Mase (superair502)      Join Date: Mar 2010       05-05-2010, 7:24 PM Reply   
Ok
I have a 2001 super air and I am trying to remove my rear vdrive hard tanks. I got out the driver side one okay but the other one is too big to remove, can anyone tell me how to get it out?
Old    TRDon (trdon)      Join Date: Sep 2007       05-05-2010, 7:56 PM Reply   
I went through this too. No one really helped me out other than telling me to take a sawzall to it.

Take the brackets all the way off and lift the front end up about 6-10 inches and drag the whole tank towards the bow. You might have to lift up on the back of the tank to clear the dump pump. Go all the way to the back of the seat. Then, lift up on the back of the tank and it will come right out. It took me about 2 hours to figure out how they come out but they came out the same for both of mone. I also have the team wedge tanks too.
Old    Mase (superair502)      Join Date: Mar 2010       05-05-2010, 8:09 PM Reply   
I have the flat tanks not the wedge is that what u are talking about
Old    D.F.T.R. Josh (downfortheride)      Join Date: Jun 2005       05-05-2010, 8:44 PM Reply   
I just had a buddie take his tanks out of his 02 210, I will pass on this thread...
Old    David (dhorton)      Join Date: Apr 2002       05-05-2010, 9:22 PM Reply   
I pulled mine out of an '02 a couple weeks ago. I had to remove the supports for the center (engine) section of the sunpad. The '01 may be a tighter squeeze as the deck is wider and the rear of the boat slopes a little forward compared to '02-'06 boats.
Old    Mase (superair502)      Join Date: Mar 2010       05-05-2010, 9:31 PM Reply   
Yea I removed the supports and there is still no way it is coming out...
Old    Matt Foell (vr6mole)      Join Date: Feb 2009       05-06-2010, 4:56 AM Reply   
IIRC we removed ours by pushing it into the cabin when the rear seat back and base was removed.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 11:18 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us