Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Thread Tools Display Modes
Old     (rbeckei)      Join Date: May 2007       04-23-2010, 7:11 AM Reply   
Well I bought a Acme 1645, to re-prop a Calabria Prov v2. Any thoughts? Has anyone repropped a Calabria?
Old     (rbeckei)      Join Date: May 2007       04-30-2010, 1:41 PM Reply   
Well here it is. I can't wait to try it out. Should have more torque
Attached Images
Old     (wake26)      Join Date: Mar 2009       04-30-2010, 4:56 PM Reply   
good luck rob hopefully it works it took me about 5 different props to find the right one for my calabria.
Old     (uofamox)      Join Date: Feb 2007       04-30-2010, 5:23 PM Reply   
Jarrod what did you end up with? I am on my third prop now. Looking for more holeshot when i am loaded up with lots of people and/or ballast.
Old     (wake26)      Join Date: Mar 2009       04-30-2010, 7:06 PM Reply   
I ended up with a 1643 13.25x14.25 0.105 cup could use a littler more cup for more bite but this one worked the best buy far out of all of them.
Old     (dbdan)      Join Date: Jun 2009       05-01-2010, 7:26 AM Reply   

I was looking at the same prop. When I spoke with ACME they said the 1645 would be the way to go. When I measured the clearance from the tip of my stock prop to the hull, there wasn't much room...Did you have the 497 as the stock prop?

Let me know how it works. Thanks.
Old     (rbeckei)      Join Date: May 2007       05-01-2010, 9:09 AM Reply   
The stock prop that I had on mine was OJ 13x17. When I measured the tip of the prop to the hull I had a litte over a 1/2 inch. The new prop is
13.125x14.25 Which will get the boat out of the water and plane quicker. But I live in Calgary, Canada . Our elavation is 3000 feet above see level.
Jorod Craig is right the 1643 is the way to go but I think there is a little more room for the prop in a Pro V then a Pro V2, but I am unsure. Also the Pro V2 is smaller boat the the Pro V so I think for my application the 1645 Prop is the Key. I hop this helps.

I think the cup size is .150

Last edited by rbeckei; 05-01-2010 at 9:13 AM.


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 12:07 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us