Just made an attemp to get my first oil change on my boat, and i'm not enjoying this.
I made the engine run a little bit to get the oil warm.
Connected my drill pump on the dipstick hose (i don't have the drain hose)
Nothing would come out, but after a while it's started to drain very slowly.
So i tough about removing the oil filter
I got the filter out in 3 hours work, it was stuck in there pretty tight. I even broke one of my clamps. I had the get a screwdriver through it and use it as a lever.
But the oil still won't come out. The pump and hose seems pretty airtight.
I'm I doing something wrong?