A few of you have been asking me to post up some pictures of this boat. Thankfully I've been very busy and have not been able to get many things up on WW.
Started out as a bone stock boat with the radio delete option (no radio or speaker holes cut).
Prepped the boat to keep it clean
Batts and subs for the boat.
Cut new speaker locations. This is not where the stock location is but it was agreed that less people would kick the speakers when walking on to the rear deck (a complaint I have had from other Sanger owners). Interior speakers are Wetsounds XS-650s
2 batteries per rear locker with automatic isolator / combiner and on board charger
Amps against hull under spotter seat. JL HD600/4 for tower, JL HD750/1 for subs, JL TMA320.4 for interior. A stinger 5 farad cap was added too.
Couldn't help but add a few LEDs.
PAC ipod interface to HSE revolution to WS-420 in factory radio plate.
Had our graphic guy make some custom CF numbers that matched the Sanger decals. Turned out very nice.
Very hard tower to do a bimini top. Lots of hardware and pole bending. Built before tower speakers came in (measured twice and built once).
Tight fit with bimini and Wetsounds 485s but the measure twice rule worked out perfect.
Tinted windshield 35% without any seams
The best part about this boat was being able to get almost every department of the shop involved.. Audio, Upholstery, Tint and graphic guy. The boat sounded and looked so good in front of the shop everyone passing by thought it was the new company boat.
Please ask if I forgot to mention any details you would like to know.
I have a few more projects to post up and will as soon as I get another break.