Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    Claudiu Barbura (claudiub)      Join Date: Apr 2008       01-28-2010, 7:20 PM Reply   
05 Supra Launch 21V, I have an oil leak where the drive shaft is connected to the v-drive. I was quoted $1500 - $2500 (lifting the engine, bringing the v-drive on the table, re-aligning the engine, lake test etc) depending on whether the shop can fix the v-drive unit (some rubber seal inside) or ship the unit to Walter.
Does anyone know a shop or a boat mechanic in the Seattle area that could work on this? PM me please.
Thank you
Old    Nick (drive139)      Join Date: Apr 2007       01-29-2010, 5:33 AM Reply   
They should not be lifting the engine to take the v-drive out. Have you checked to see if the v-drive oil sending unit is leaking? I have worked around Supras for a long time and never seen one leak around the drive shaft. I would get a second opinion.
Old    Bruce Mac (brucemac)      Join Date: Dec 2005       01-29-2010, 6:08 AM Reply   
email sent
Old    Harold Hemming (h20king)      Join Date: Dec 2009       01-29-2010, 6:45 AM Reply   
it has a shaft seal.To remove the drive they will need to unbolt the v drive mounts raise the engine place blocks under the trany then unbolt the v drive from the trany and remove.once v drive is reinstalled they will have to align the engine to the shaft and test the quote you were given is not a bad price there is a lot of labor involved.
Old    Claudiu Barbura (claudiub)      Join Date: Apr 2008       01-29-2010, 10:35 AM Reply   
I am sure the leak is from the shaft seal. I wonder if this was caused by me damaging the prop last year.
Thank you
Old    Aaron Ware (99_slaunch)      Join Date: Oct 2005       01-29-2010, 11:54 AM Reply   
I went through this about a year 1/2 ago on my 05 22ssv. The v-drive pan would always get oil on the bottom. Just enough to cover your finger tip. It was the shaft seal on mine to. They replaced the whole v-drive under warranty. When they put the new one in it too had a leak but this time it was from one of the magnetic plugs on the v-drive. I pulled the plug and re sealed it. No more leaks.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 3:59 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us