Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Wakesurfing

Share 
Reply
 
Thread Tools Display Modes
Old    Parker Frost (waketowake)      Join Date: Jul 2007       03-24-2009, 2:24 PM Reply   
my walden broke and im going to make it into a wakesurf. I have a friend that will shape it and glass it for free. All i have to do is get the fiber glass off. Where should i start? The tail is broken so it leaves me 5'5" to work with
Old    Smed (smedman)      Join Date: Feb 2006       03-25-2009, 8:30 AM Reply   
Parker,
Just take a nice sharp utility knife and cut along the outside of the rail - it is OK to cut through the foam a bit since you will be probably shaping that down anyways. Once you've cut all the way around, you should be able to peel the fibgls off the foam slowly and carefully. you will probably be getting little chunks of foam here and there, but again, if you are reshaping it into a wakesurf, I assume you'll have plenty of foam to work with. good luck

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 10:07 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us