Folks using PerfectPass and ballast, I need your help.
can you please post what your KDW, NNW CS and CR settings are set at.
My perfectpass works great when their is no-one being towed, but as soon as you get someone on the rope, the boat will not come up to the set speed. (Same results with 750 lbs and 1050 lbs of ballast)
For example, the speed can be set at 9.8 MPH for surfing, rider gets up, perfectpass engages and beeps, but is only pulling rider at about 7 mph thru nothing but froth.
Takes a lonnnnnnnng time for the boat to ever get to set speed.
I'm thinking & hoping it's just a computer value that needs reset.
According to the manual the CS factory setting should be 750, but mine came from the factory set at 1800 (range is 735-900)!
Boat is a 2009 Moomba Outback V with factory installed PerfectPass - Wake Board Pro / Factory installed Gravity 3 ballast system.