Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through December 15, 2008

Share 
Reply
 
Thread Tools Display Modes
Old    Adam Daily (dailyssv)      Join Date: Oct 2007       10-29-2008, 6:00 AM Reply   
What do you use to take mineral deposits off you boat?
Old    Dave (captain_542)      Join Date: Oct 2006       10-29-2008, 6:45 AM Reply   
mix of vinegar and water. cheap and smells like Easter. half and half for easy spots. less diluted for harder spots. I dont think vinegar hurts anything. I finish with a spray detailer so the smell goes away.
Old    Chris (prostar19)      Join Date: Oct 2005       10-29-2008, 7:09 AM Reply   
I learned this trick from a friend that has an all black boat. Use Comet Shower and Tile spray cleaner. It is safe for fiberglass and gel coat. it will dissolve all water spots and leave an unseen film that actually repells them
Old    julianne (jujube)      Join Date: Aug 2008       10-29-2008, 9:47 AM Reply   
I've used vinegar and water too.

Chris - I'm gonna try the Comet Shower and Tile spray cleaner - good idea! :-)
Old    stillstandin            10-29-2008, 9:52 AM Reply   
Ive used vinegar and water for years, but the spots are so bad on my gel coat now, it doesnt work. Im gonna try the comet, good idea.
Old    David Williams (wakeworld)      Join Date: Jan 1997       10-29-2008, 10:04 AM Reply   
I've used the vinegar and water thing for water spots, but I've got some nasty deposits that I can't get off, so I'm looking for something more aggressive. I might try the shower spray idea. However, I've heard of people using Zing, FSR and/or muriatic acid for really stubborn stains. Does anyone have any experience with these?
Old    Kerry Parker (kerryn2skiing)      Join Date: Apr 2007       10-29-2008, 9:30 PM Reply   
Hot Sauce
http://www.boatbling.net
Old    KStateAlumni (bbeach)      Join Date: Jul 2002       10-30-2008, 7:44 AM Reply   
CLR 50/50 with water...
Old    Mike Capuzzo (cccbuilders)      Join Date: Jun 2007       10-30-2008, 7:54 AM Reply   
hot sauce works great and has wax in it

50/50 vinegar & water works great and does take off your wax coat, if used boat must be waxed often to prevent gel coat fading
Old    Hate2party (slipknot)      Join Date: Aug 2001       10-30-2008, 8:00 AM Reply   
All this stuff works really well, especially if you put your boat in 100 degree weather alot.

http://www.hammerheadboatworks.com/

When Buzz Grande is not around, it keeps my boat looking new.
Old    stillstandin            10-30-2008, 8:10 AM Reply   
Also, make sure its distilled water...
Old    Dave (captain_542)      Join Date: Oct 2006       10-30-2008, 8:26 AM Reply   
Ive used zing but it smells bad and burns your skin. Ive always been afraid to leave it on too long in fear of it burning through the gel. it works great for mildew on hulls that have been left in the water all summer.
Old    Sam Ingram (wakeboardsam)      Join Date: Jun 2008       10-30-2008, 8:28 AM Reply   
Old school trick... take a towel and wet it in the same water that the boat was in. Ring it out and wipe the boat down with that towel. For some reason almost no spots appear. It's old school and was taught to me by an old v-drive guy...
Old    Edgar Ramon (jame04)      Join Date: Nov 2007       10-30-2008, 8:41 AM Reply   
I have used lime away or toilet bowl cleaner
Old    alan plotz (alanp)      Join Date: Apr 2001       10-30-2008, 12:58 PM Reply   
kaboom cleaner at walmart. next question.

http://www.greatcleaners.com/kaboom.html?cid=yahoo-kaboom-cleaner-Kaboom
Old    pdxWAKE.com            10-30-2008, 1:54 PM Reply   
I typically own black boats and will use vin and water or babes for easy stuff and wipe downs, but on the real baked in water spots use
Meguiars Hard Water Spot Remover
Follow the directions and use some elbow grease. I promise you it will get them all out. I would apply a coat of wax after that as it does strip the boat. Good luck
Old     (freshtracks)      Join Date: Feb 2006       10-30-2008, 3:17 PM Reply   
+ 2 on the HOT SAUCE. I use to use the vinegar/distilled water/ liquid wax mix and the hot sauce is WAY better. I have a lot of black in my boat and it gets everything nice again.
Old    Peter T (deltawake)      Join Date: Sep 2004       10-31-2008, 7:13 AM Reply   
Babe's Spot Solver followed by Babe's Boat Bright
Old     (will5150)      Join Date: Oct 2002       10-31-2008, 10:55 AM Reply   
The comet or Lime away work great- just apply with a light cloth and spray off- no elbow grease needed. The wax will come off too- so be prepared to re-apply, but once you get it waxed, a little vinegar and water work great for up-keep. I do this twice a summer and it works great.
Old    Chris H. (04gravitygames)      Join Date: Jan 2006       10-31-2008, 3:51 PM Reply   
KABOOM....works wonders
Old    tom fischer (tomfish)      Join Date: Apr 2003       11-02-2008, 7:36 PM Reply   
hotsauce works really good, but way to pricy if you use your boat alot. I'll try the hammerhead stuff it seems reasonable on price.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 3:09 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us