Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Wakeboarding Discussion Archives > Archive through September 22, 2008

Share 
Reply
 
Thread Tools Display Modes
Old    Kiley Hughes (mrboston187)      Join Date: Jul 2008       09-04-2008, 2:55 PM Reply   
is it very difficult to tighten the hinge up on these? The right one seems a smidge looser than the left, and i was gonna tighten it up, is it that difficult? should i take it to the shop or what
Old    Kevin (pri3st)      Join Date: Aug 2007       09-04-2008, 3:04 PM Reply   
No it's very simple, look at it & you'll figure it out.

(Message edited by pri3st on September 04, 2008)
Old    Isaac Gredinberg (extremeisaac)      Join Date: Aug 2005       09-04-2008, 3:16 PM Reply   
Kiley, on the cable part where it attaches to the binding on the bottom there is an eyelet hole held in with a screw, remove the screw and you will see that you can thread in and out the eyelet hole. clockwise makes it tighter counter makes it looser
Old    Rob Flaherty (mc_x15)      Join Date: Jul 2008       09-05-2008, 5:23 AM Reply   
I have torques that are doing the same thing. It doesnt seem like its the hindge though, seems more like the top part with laces are stretching. When i got them the laces would pull tight, now the left one pulls all the way tight but the binding is still slightly loose. Can I replace the top par with the laces?
Old    sealyon.net            09-05-2008, 5:58 AM Reply   
On the 08 boots the cable adjusts on the bottom not like the 07 being on the side.
Just take the boot off the board and there are 2 cables with nuts on the bottom. that is where you adjust them.
It only takes a little.
Old    C.I.E. J-Rod (jarrod)      Join Date: May 2003       09-05-2008, 7:21 AM Reply   
Yep, Lyon has it.

Rob, your local pro shop should have extra strings and lace locks. I believe the torque still uses the older laces/locks. See if you can get a set of the 08-up stuff for your torques. It works very well.
Old    Rob Flaherty (mc_x15)      Join Date: Jul 2008       09-05-2008, 7:48 AM Reply   
will do thanks jarrod
Old    Mike K (mike2001)      Join Date: Feb 2008       09-05-2008, 7:49 AM Reply   
Rob, contact CWB for replacement laces and locks. They sent replacments to me, no questions asked. Good customer service.
Old    Rob Flaherty (mc_x15)      Join Date: Jul 2008       09-05-2008, 9:57 AM Reply   
really, i will do that, thanks mike k, appreciate it

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 5:48 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us