Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through May 08, 2008

Share 
Reply
 
Thread Tools Display Modes
Old    Ronia (ladythump)      Join Date: Jul 2004       04-24-2008, 8:25 AM Reply   
i need to replace my trailer jack. assuming the new one comes with instructions, but juse in case, has anyone ever done this before? i have no clue how to get the original off.

thanks.
Old    KStateAlumni (bbeach)      Join Date: Jul 2002       04-24-2008, 8:28 AM Reply   
Mine required snap ring pliers to get the rotating mount off. FYI...
Old    Ronia (ladythump)      Join Date: Jul 2004       04-24-2008, 8:32 AM Reply   
I was just reading some old threads and i think mine may be welded to the trailer. i need to double check what piece i need. anyone else?
Old    Doug H (doug2)      Join Date: Jan 2004       04-24-2008, 8:35 AM Reply   
The two replacement jacks I've installed have four bolts that go through a plate welded to the tongue.

Fairly straightforward. But I have seen some like KState mentioned where the swivel hardware is integrated into the tongue.

Does it look like this?
http://www.skidim.com/prodinfo.asp?number=5800496

(on edit)I forgot I had this place bookmarked. You might be able to replace part of the jack if that would be easier.

http://www.easternmarine.com/em_store/jacks/

(Message edited by doug2 on April 24, 2008)
Old    Mike (bladeaustin)      Join Date: Feb 2008       04-24-2008, 8:54 AM Reply   
I just did this and KSTAE is correct; it did require snap ring or c-ring pliers.
Old    Ronia (ladythump)      Join Date: Jul 2004       04-24-2008, 8:59 AM Reply   
its a boatmate trailer if that helps. i'm going to call boatmate later today.
Old    George Aslinger (mobv)      Join Date: Jun 2002       04-24-2008, 9:52 AM Reply   
I replaced one on a boatmate trailer last year. 4 bolts that held it on.
Old    Jman (jmanolinsky)      Join Date: Dec 2005       04-24-2008, 10:43 AM Reply   
My 2000 model boatmate trailer required the C-clip removal.

Jman

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 7:47 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us