Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through May 08, 2008

Share 
Reply
 
Thread Tools Display Modes
Old    Heath Bradley (heath)      Join Date: Feb 2008       04-23-2008, 6:51 PM Reply   
I took my new 2008 Supra 22V out today and everything went well. When I brought the boat home and put it away I noticed water on the garage floor. After carefull inspection, this water was leaking at where the drive shaft enters the boat hull. This is my first v drive and all is new to me. Is this normal? I would not think so but did not know if there was some sort of adjustment that needs to be made.

Please advise.
Old    Bill K (bill_airjunky)      Join Date: Apr 2002       04-23-2008, 10:00 PM Reply   
There is a seal around the prop shaft that is water cooled. It is designed to leak into the boat like 10 drips a minute. The rate it leaks can be adjusted by a big nut on the inside around the shaft. You have to put the boat in the lake, put it in gear at idle & watch how much it leaks. Then tighten or loosen it as needed.
All that said, I guess water could leak out just as easily as it leaks in. So I'd be looking at how fast it's leaking in.

Seems like an 08 Supra would a) have the newer dripless shaft seal in it. And b) get those bugs worked out by your dealer.

(Message edited by bill_airjunky on April 23, 2008)
Old    JK (justridin)      Join Date: Oct 2002       04-23-2008, 10:02 PM Reply   
Normal. Enjoy your new boat.
Old    Steve Oh (olskooltige)      Join Date: Mar 2007       04-24-2008, 6:17 AM Reply   
There is a line that goes to the dripless seals from engine waste/bypass water for cooling. The water in this line, and some from the cooling system, will drip from the dripless seal are where the shaft enters the hull. If you want to see how they work, or how they install, there are some photos and an install at http://www.wakeboatworld.com

Have fun.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 5:33 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us