Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through February 21, 2008

Share 
Reply
 
Thread Tools Display Modes
Old    David Miller (otown_dave)      Join Date: Dec 2007       02-02-2008, 2:54 PM Reply   
Bennett & Lenco show placement for tabs on the side but nothing for a center mount. So if I make sure the leading edge is even with the hull & the trailing edge of the plate is 3/4" above at full up it should be fine?
Old    Art (rallyart)      Join Date: Nov 2006       02-02-2008, 7:41 PM Reply   
Leading edge is even with the hull. You want smooth water flow.
Trailing edge is down only 1/4" at most. Just having the extra length back there gives you lift. Up then becomes about 1". If the trailing edge is down only 3/16" that's fine. Set the travel at full down, when you go to mount the pistons.
Old    David Miller (otown_dave)      Join Date: Dec 2007       02-02-2008, 8:06 PM Reply   
The 3/4" up # was Bennett's & I think lenco says 5/8" full up,Then all the travel downward for the side mounted tabs.
Old    Art (rallyart)      Join Date: Nov 2006       02-02-2008, 8:32 PM Reply   
Sanger's advice to me was much different than that when I installed mine. I don't have a copy of their email to quote to you but mine barely goes down. Maybe someone with a Supra can chime in with a measurement from their hull. The Tige has a few other things going on in their hull so you can't really compare them.
If you think about it they are doing a different job and don't have the prop wash going past them so the water is moving a a little slower velocity.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 1:38 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us