Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through January 12, 2008

Share 
Reply
 
Thread Tools Display Modes
Old    Edgar Ramon (jame04)      Join Date: Nov 2007       11-09-2007, 12:04 PM Reply   
I may open up a can of worms here but let me ask for opinions please. What boat do you think handles best in choppy water, this would be for casual boating not for wake boarding etc.

MC X15, VLX, Tige 24ve or RZ2, Supra 24

thanks.
Old    882001 (882001)      Join Date: Nov 2003       11-09-2007, 1:22 PM Reply   
bigger is usually better so the 24s. in mc look at x 45.
Old    Brett Yates (polarbill)      Join Date: Jun 2003       11-09-2007, 1:32 PM Reply   
If you are looking for a good family boat in that size and that is good in the rough water check out the new X-35. It has a fridge and the you can set it up with a forward or rear facing passenger seat. It also has a deeper V like the CSX(I think) so it should ride great in rough water.
Old    freefly70            11-09-2007, 1:41 PM Reply   
Ride in all those boats they are all expensive boats. In my limited experience riding in 20'-21' BU, MC and Moomba in rough water the Tige brand boats are the smoothest by far and bigger is usually better like previously said. The Salt series by MC should run great in the chop but never been in one. If your in Florida most of the dealers of all those brands would love to demo you. I would say we have a great group of dealers for the entire state of FL especially Dom at Forte's
Old    George Aslinger (mobv)      Join Date: Jun 2002       11-09-2007, 2:36 PM Reply   
Centurion Avalanche or Enzo 230, 240 are great rough water boats.
Old    Edgar Ramon (jame04)      Join Date: Nov 2007       11-09-2007, 6:50 PM Reply   
I should have mentioned that I boat on a 2800 ac lake in the mid west. So no need for salt water. I am leaning towards the Tige RZ2???
Old    Kevin (premierwake136)      Join Date: Jun 2005       11-09-2007, 7:04 PM Reply   
tige 24ve deffinatly
no question?
Old    Art (rallyart)      Join Date: Nov 2006       11-09-2007, 7:08 PM Reply   
If you're in rough water an adjustable trim plate is really useful. Standard on the Tige and I think Supra and an option on others.
Old    Bill K (bill_airjunky)      Join Date: Apr 2002       11-09-2007, 8:29 PM Reply   
Throwing the X15 in there isn't even close to a fair comparison. Low freeboard & mid engine.
The VLX does pretty good with the 500 lbs of mid ballast full.
But I'd have to think that the bigger boats with the trim tabs would easily be the best in the chop.
But compare the 24' Malibus & Mastercrafts & you'd have a much closer comparison...... and nicer boats IMO.
Old    Swatguy (xstarrider)      Join Date: Jun 2007       11-09-2007, 8:35 PM Reply   
Billy the X15 is the 21ft 8inch V drive

The X14 is the direct drive

I am an MC guy for sure but the Supra 24 has the hands down best rough water ride out of all of those choices. Very deep inside as well. The supra is hard to beat....A Centurion also rdies very well. The Avalance is big to at 22ft with 102 in beam..The Mc x45 handles it for sure but it doesn't come near the Supra or the Avy. I have no experience with Tige tho
Old    Jason (azpowerhouse)      Join Date: Jul 2007       11-09-2007, 9:20 PM Reply   
We test drove a tige and malibu both the same size, 22's or bigger (cant remember). The tige with no ballast was great, I was surprised. The malibu with 1.5k ballast was great, and was a pig. Hands down, even the gf noticed it, the tige was great. The water was choppy as in white caps at a lake with 50+ boats being test driven, along with all the other go fast boats. Personally I dont like chop, and dont ride chop, And I do like the malibus(Contradicting I know but when we are in the water the ballast are full for boarding...,i like everything but the chop,and has to have upgraded engine for the ballast), especially the new 23 lsv, big but not too big......brandy new. But then I like the new epic 23.....3k lbs for boat+4k lbs for ballast..7k you can take that deep sea fishing, maybe all the way to the bottom of the ocean....lol

Do you ride chop as in innercoastal, inlet, bay or what? Where are you from?
Old    Nick Tomsyck (sidekicknicholas)      Join Date: Mar 2007       11-09-2007, 9:29 PM Reply   
the bigger the better, and v-drive is a must
Old    Angry Mike (angrygolucky)      Join Date: Jun 2006       11-09-2007, 9:38 PM Reply   
Avalanche is 100" beam, not 102... and yes it can really cut through chop especially with the trim tab.
Old    Bill K (bill_airjunky)      Join Date: Apr 2002       11-09-2007, 10:26 PM Reply   
I stand corrected, Swatty. Thanks for settin me straight.
The bottom line is any deep V hull with some kind of adjustable trim is going to handle the chop better, regardless of the make.
Old    stillstandin            11-09-2007, 10:40 PM Reply   
Also, any Sanger. It was the deciding factor when I demoed boats. Tested a lot, Sanger handled rough water the best IMO
Old    Dex (tarpongator)      Join Date: Jan 2006       11-09-2007, 11:26 PM Reply   
In my demo experience of 23 ft or less
(Malibu {3 boats}, MC {3 boats}, CC {1 boat}, Tige {2 boats}, Session {1 boat}), I chose a SAN 220. I did't demo a Centurion, Sanger or Supra/Moomba.
Old    Dex (tarpongator)      Join Date: Jan 2006       11-09-2007, 11:30 PM Reply   
In my demo experience of 23 ft or less
(Malibu {3 boats}, MC {3 boats}, CC {1 boat}, Tige {2 boats}, Session {1 boat}), I chose a SAN 220. I didn't demo a Centurion, Sanger or Supra/Moomba.
Old    Art (rallyart)      Join Date: Nov 2006       11-09-2007, 11:42 PM Reply   
I took my Sanger out in 50+ mph winds blowing down 10 miles of lake and I felt very safe in it. I was wet from the spray though as the wind was blowing any spray from the hull straight across the boat. Running downwind the bimini was still humming and it never does normally.
If Edgar is from the midwest though maybe he doesn't have a dealer nearby.

(Message edited by rallyart on November 09, 2007)
Old    Edgar Ramon (jame04)      Join Date: Nov 2007       11-10-2007, 6:49 AM Reply   
No delaer for Sanger, Centurion, or MB Sports. The Tige I am looking at has 900lbs of ballast so I am thinking that would help also.
Old    Ryan Cowan (aces6692)      Join Date: Nov 2006       11-10-2007, 11:56 PM Reply   
ive been in an x star, x30, x2, x 45, and sanger v210, and i'd have to say the x 45 handled the best in chop.......(all the boats were in choppy water)

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 3:32 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us