Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Wakeboarding Discussion Archives > Archive through October 14, 2007

Share 
Reply
 
Thread Tools Display Modes
Old    T-Bag (nasty530)      Join Date: Aug 2007       10-06-2007, 4:47 PM Reply   
What would you all recommend for a center fin on a 2007 CWB Marius 140 cm. I got a board without fins and would prefer to have them. Suggestions?
Old    Lyle Ramsdell (sunsport)      Join Date: Sep 2002       10-08-2007, 3:53 PM Reply   
Personally I would ride with the Chrome Dome fins. I hear they are pretty sweet . I am pretty sure they will fit your board. It looks like each fin for your board requires one bolt, There should be holes for pins on the bottom of the board. How far are these pin holes from the bolt hole? I can then tell you if the CDI fins will fit your board.

Skiing made me board,
Lyle
www.cdifins.com

(Message edited by sunsport on October 08, 2007)
Old    B Fitz (jdrcrew8)      Join Date: Jun 2005       10-08-2007, 4:02 PM Reply   
I can vouch for Lyle's product. I had a LF Trip138 that I had a hell of a time keeping the side fins on. I bought 4 CDI fins from Lyle and never worried about them again. They are spendy, but a quality product that I never had an issue with. I can't say the same for fins from the mfg.
Old    Josh (romes)      Join Date: Sep 2006       10-08-2007, 4:05 PM Reply   
hey lyle...your colin wrights hopefully fit a slingshot right??? cuz if they do i'll take 4
Old    brutto 76 (brutto_76)      Join Date: Feb 2005       10-08-2007, 4:06 PM Reply   
Many people ride this board without the centre fins so there's probably someone out there who will sell you their original fins. Try putting an ad in the "wanted" section.
Old    Lyle Ramsdell (sunsport)      Join Date: Sep 2002       10-08-2007, 4:38 PM Reply   
Thanks B Fitz, appreciate the positive feedback.

Jr I just put in an email to a guy I know at Slingshot so he can check for me. From what I can though they look like they will fit. If the holes are 1.5" apart at the centers, and 1/4" diameter then you are good to go. I'll let you know when he gets back to me. Do you like that board? I haven't had a chance to try it yet.

Skiing made me board,
Lyle
Chrome Dome
Old    BG WCC (bigpapaf1f)      Join Date: May 2005       10-08-2007, 4:51 PM Reply   
I ride a Marius, and I ride it with the smaller CWB fins that come with the absolute. They are prefect. IMO The fins that come with the Marius are a lil to big and I don't like it finless. The lute fins are just right for my riding style they are short and long, and go good with this board. You have to remeber that the fins on a 06-07 Marius already sit on a v and mount on a rail that sits up a bit, So a 1" fin is almost like a 1.5" I think the fins it comes with are 1". I think the lute's are .5 or .7 and long. Good luck BG

(Message edited by bigpapaf1f on October 08, 2007)
Old    Jason (azpowerhouse)      Join Date: Jul 2007       10-09-2007, 1:07 AM Reply   
I dont have any center fins, only the two small ones... wouldnt ever go back to center fins.
But different boards do ride different.
Friends are taking center ones off as well...

Use the edge of the board more to control, and a lot easier doing any surface stuff.

You have any pics of that bus?
You been riding much? where?
Dont think I have seen you. Late.
Old    Josh (romes)      Join Date: Sep 2006       10-09-2007, 8:04 AM Reply   
LYLE,

yea i like it so far...i'm still prolly not gonna get rid of my lf set up...but for sure its a different ride...can't wait to hit some rails on it..
Old    Jeff Baker (innov8)      Join Date: May 2005       10-09-2007, 11:54 AM Reply   
The small Absolute fins are .8's they work great on the Marius.
Old    T-Bag (nasty530)      Join Date: Aug 2007       10-09-2007, 12:30 PM Reply   
Haha the bus, just thinking about that makes me laugh. It all started out as a joke, now it has turned into a complete motor home conversion, lift, upgraded turbo, the works. No pictures yet, but soon. I have been going to Roosevelt lately, going up the Sat. 20th eve and coming back Mon. eve. I have extra room or if you wanna meet up .
Old    Josh (romes)      Join Date: Sep 2006       10-09-2007, 1:27 PM Reply   
seriously...can we get some pics of this kitted and lifted bus for gods sake..hahah..i want one..
Old    Jason (azpowerhouse)      Join Date: Jul 2007       10-09-2007, 9:43 PM Reply   
T-
I will see whats going on that weekend, definitely a possibility. See if the crew is busy or what. We have been going out to bartlett at least once a week. Holler if your headed that way, as well.
Are you running 3k in your mc? what engine? Just curious, Late.
Old    T-Bag (nasty530)      Join Date: Aug 2007       10-10-2007, 10:04 AM Reply   
Close to 3k, probably about 2000-2400 in water and another 600-1000 in other ish. I need to reprop it as it wont plane out fully loaded. It is the LT1 corvette engine.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 5:46 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us