Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old     (alcarlaw1)      Join Date: Jun 2007       10-09-2013, 6:38 AM Reply   
Having recently purchased a 2000 X-Star, I am going through the process of repairing/tidying/updating the boat. I've sorted all the mechanical gremlins, added perfect pass, ballast, heater, sound system so now looking towards the aesthetics.

I'm looking for ideas on the side graphics on the boat. I don't really care for the Oval in the gel so ideally want to hide this when the new graphics are added.


So far I've changed the stern graphics which were all torn up and scratched from this


to this


I've got replacement Silver Mastercraft logos to replace the white ones on the sides (first pic) and tie in with the silver lettering on the stern however a bit stuck as to what to do with replacing the X-Star logo

All replacement graphics will be custom cut vinyl, so I need to work with one or two colours, possibly three but I dont want to overlay too many layers of vinyl. All that means I need to keep the design fairly basic.

So open to ideas and if anybody is creative with photoshop that would be ideal!!!!

Last edited by alcarlaw1; 10-09-2013 at 6:46 AM.
Old     (bcrider)      Join Date: Apr 2006       10-09-2013, 10:48 AM Reply   
I've always been a fan of no decals. Cleaner looking and FYI, although Mastercraft did pull for XGames wakeboarding hasn't been included in XGames for quite sometime now so the rear decals are still out of date. I would have just simply put mastercraft on the back or nothing at all.
Old     (wakereviews)      Join Date: Sep 2006       10-09-2013, 10:59 AM Reply   
I'd opt for an updated tower first if it was me. Remove the decals and update the tower and it will look like a new boat.
Old     (alcarlaw1)      Join Date: Jun 2007       10-09-2013, 11:16 AM Reply   
Because there is an oval on the gelcoat line, simply removing the X-Star logo would look wrong.

Nothing mechanically wrong with the tower, so no need to replace it.
Old     (Reez)      Join Date: Mar 2010       10-09-2013, 12:21 PM Reply   
Flames and skulls !
Old     (alcarlaw1)      Join Date: Jun 2007       10-09-2013, 1:27 PM Reply   
er, no!
Old     (xstarrider)      Join Date: Jun 2007       10-09-2013, 1:40 PM Reply   
The in the gelcoat oval is killer. I have not yet seen anything that can replace the factory graphic and still look good. Why not work on tweaking the factory one into something new. I really think a full wrap is the only option to upgrade.

I personally love the classic look


This is a wrap I been tossing around in the red and white for me.
http://m.ebay.com/itm/200864038771?nav=WATCHING&sbk=1
Old     (phillywakeboarder)      Join Date: Sep 2008       10-09-2013, 2:16 PM Reply   
Don't touch the tower! It's solid as a rock! My star's been without decals all season, and I agree that it looks funny with the bare oval. I'm interested to see what you decide to do. Just FYI, the original side decals (and all the other ones, for that matter) pop up on ebay from time to time. I actually have a set but I haven't gotten around to putting them on yet. Good luck man!
Old     (rullery)      Join Date: Jul 2012       10-09-2013, 3:02 PM Reply   
if that oval is gelled in, remove the vinyl and replace with a more modern "X" that fits neatly inside the oval. even add "STAR" if you want. basically just modernizing the current 90's graphic. The key is working with that oval. Also, you'll need vector graphics so no photoshop. More like illustrator.
Old     (rullery)      Join Date: Jul 2012       10-09-2013, 3:08 PM Reply   
take a picture of the side of the boat, dead center. import the picture in illustrator, trace over the gel lines and you will have your template. then crack a beer and draw stuff inside the lines.
Old     (alcarlaw1)      Join Date: Jun 2007       10-10-2013, 2:31 PM Reply   
an option I am toying around with is to use the Star Wars type set. So Big X to take up the oval and the Star in the Star Wars type. Photoshop
time me thinks...
Old     (xstarrider)      Join Date: Jun 2007       10-10-2013, 8:43 PM Reply   
Not the best angle but similar thought. Big X with star written


Name:  image.jpg
Views: 374
Size:  38.7 KB
Old     (jordanleininger21)      Join Date: Aug 2012       10-10-2013, 9:14 PM Reply   
thats a saced out star right there haha^
Old     (alcarlaw1)      Join Date: Jun 2007       10-11-2013, 1:10 PM Reply   
forget about the colours and shading, what are the thoughts on this..

Old     (jamespjackson95)      Join Date: Jul 2012       10-11-2013, 4:43 PM Reply   
Looks like the Xbox logo with Star Wars font over it. Honestly I'm not a huge fan of it, but it's your boat if you like it definatly go with it. I. Like the way the boat looks without the graphics best.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 9:25 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us