It is 110 watts x 6 channels. Every speaker would have it own channel and would be driven at 4 ohms. Since this amp is a class D and you would be running at 4 ohms - it would be the cleanest and most efficient way to do it.
Thanks, They are 180 watts peak, I don't have tower speakers at the moment so i was hoping to get get them as loud as possible, How much difference will it make if i put more power to them or is that plenty? 150 ish?
You'll want the headroom on the amp so you don't gave to run the gain full throttle. Set ur headunit 3/4 volume and tune your amp in from there. When it starts distorting turn the gain back down a little bit and you'll b good.