Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old     (travisz)      Join Date: Jun 2008       05-04-2012, 10:28 AM Reply   
I know this topic has been brought up thousands of times, but it is my first attempt at cup holder rings for my Malibu....
Can I see peoples build pics, or diagrams they used or some ideas or suggestions of the best way to do it...

Thank you guys, your help and knowledge is always appreciated.

Trav
Surfinwest Boardshop
Surfinwestshop.com
Old     (ian_ashton)      Join Date: Jul 2008       05-04-2012, 10:58 AM Reply   
Bottom of the page - it took me a few tries to get the pictures to work, lol;

http://www.wakeworld.com/forum/showthread.php?t=792805
Old     (timmyb)      Join Date: Apr 2007       05-07-2012, 8:18 AM Reply   
I used Ian's method to try it out only I used a router table and it works ok. I've heard from someone else that you can possibly get a local acrylic shop to make the rings in the .375 thickness for under $10 each. The .220 plexi/acrylic/whatever you personally call it is ok but I think I want it thicker.
Attached Images
  
Old     (ian_ashton)      Join Date: Jul 2008       05-07-2012, 9:41 AM Reply   
That looks good! The problem I had with the thicker rings is that my back seat slides over the cup holders when I remove it. All personal preference I guess
Old     (timmyb)      Join Date: Apr 2007       05-07-2012, 9:56 AM Reply   
Thanks Ian, couldn't have done it without your thread! I bought those same lights you did, only in white, and man are they bright! High quality stuff too!
Old     (timmyb)      Join Date: Apr 2007       05-07-2012, 12:21 PM Reply   
Here are the jigs that I made for the router table and the drill press (not necessary). I cut the acrylic down to 4.5" squares first so I needed the jig for the drill press to make sure the holes were centered.
Attached Images
  

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 3:06 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us