Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old     (eric21v)      Join Date: Mar 2010       03-22-2010, 11:33 PM Reply   
my tower speakers pop when the ignition turns off what may cause this
Old     (piggie)      Join Date: Feb 2010       03-23-2010, 12:18 AM Reply   
turn on/off pop is generally caused by either a dodgy earth or dodgy connection, the trick is to eliminate all possibilities one by one
Old     (acurtis_ttu)      Join Date: May 2004       03-23-2010, 6:30 AM Reply   
http://www.earmarkcaraudio.com/Xcart...cat=259&page=1


or go pick one up at radio shack.
Old     (philwsailz)      Join Date: Feb 2009       03-23-2010, 6:43 AM Reply   
Eric-

Turn-on pops are common, unfortunately. There can be lots of casues... Everything from a faulty install to a poor ground, to gains set to high, to "flea-market" gear.... It would be anybody's guess based on your post.

There are a few super guys who ang out here who can help you make a proper diagnosis. Tell us what equipment you have, how it is connected, and what your basic settings, (gains, crossovers, etc) are and we can give you a better idea of what might be the problem. Otherwise, you are going to get nothing but guesses.

Let us know!

Phil
Kicker
Old     (thesack)      Join Date: Mar 2008       03-23-2010, 7:13 AM Reply   
It could be an internal problem with your amp, but you will need to properly diagnois your stereo first.

I had a turn off pop on my tower after I did my stereo upgrade this winter. When I diagnoised mine I took the RCAs off the amps (I have one amp for each pair of XM7s) for my tower to make sure if was just the tower and not the entire system popping. Rehooked the RCAs up to the right side of my tower, had no popping. Unhooked the right side, rebooked the left side and the popping returned. Checked all my connections, all were good. Talked to the guys at Exile, took my boat up to them and it was determined that the amp had the wrong size resistor in it which was causing the turn off pop. They fixed the resistor issue and I haven't had a turn off pop since. Which I must add was great customer service on there part.

Last edited by thesack; 03-23-2010 at 7:16 AM.
Old     (mmandley)      Join Date: Jan 2010       03-23-2010, 8:18 AM Reply   
Ever since i had my boat i had the pop when turning off the system. No matter if i turned the deck down or not.

From what ive read its a Kenwood Deck issue also. They have an aggressive power down cycle, meaning its instant and this causes a nasty pop. My amps have a slow power down cycle already but the pop is there. Exile said the cure is to add a resister to the system and it will allow a slower power down process.

This isn't to say you don't have a problem in your system at all. Its just what i have learned on my system.
Old     (acurtis_ttu)      Join Date: May 2004       04-07-2010, 9:09 AM Reply   
I think it's the 200uf / 50v cap...it's fairly small. round cylinder abotu 1/4 inch long, thckness of a pencil. Make sure you hook it up correctly or it will explode.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 12:06 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us