Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through June 08, 2008

Share 
Reply
 
Thread Tools Display Modes
Old     (rmdanie)      Join Date: Jun 2007       06-04-2008, 8:09 AM Reply   
I am going to resurface the good ole DIY threads for HLCD systems. I have decided on this route and have a couple of things I need clarity on. Here is an old drawing of one of these systems that I am using as my design. Below is the pictue and List of compnents


Horns 2 Emenince PDS-2002S w/6x8 Horn Flares
MidBase 4 Eminence 8" Beta's (8 0hm) 225 wrms
Sub 1 Kicker 12" L7 4ohm DVC 750 wrms

Upload

This old diagram shows half of my tower arrangement. I plan to double this. Below are my questions as I am not an audiopile...

1. Can I wire both horns from the same crossover/Lpad or do I need a seperate one for each can?

2. The author of this diagram called this a 4 ohm system. Why is this not a 2.66 ohm system. Including the horn, there are 3 speakers in the diagram with 8 ohms impedence each. Is this really 4 ohms and why?

3. Assuming this is a 4 ohm system and that I will be installing 2 of them, what would be the best way to wire the two system to 1 Kicker KX800.2. I really want the amp to see 2 ohms so it can send 400 wrms to each system. I can only figure to get 2 ohms on the amp by running it mono and that is 800.1 @ 2 ohm which is a no no.

I am thinking that I am going to have to get another KX800.2 amp. At 4 ohms they run 200x2 or 400x1 wrms.

Any other suggestions???

I just ordered the equipment and can't wait to start on it.

Ryan

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 7:17 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us