WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Anybody made a Flag pole (http://www.wakeworld.com/forum/showthread.php?t=802536)

jonblarc7 06-27-2014 10:24 AM

Anybody made a Flag pole
Any body made a cheap flag pole?

I'm thinking I just buy a PVC pipe that will slide over my rear pylon. But I'm not sure how to secure it. I think I read on here somewhere you could put hose clamp round it and if it was a tight fit. It would squeeze the PVC pipe enough to hold it on.

jonblarc7 06-27-2014 10:28 AM

1 Attachment(s)
Or like this

soonerbilly 06-27-2014 10:34 AM

Except you need a SOONERS flag!

Redheadd 06-27-2014 11:01 AM

I just zip tie my flag to tower

Redheadd 06-27-2014 11:02 AM

1 Attachment(s)
Like this

jonblarc7 06-27-2014 11:07 AM


That's what I want to do next weekend.

I think I could cut some notches in the PVC pipe on one side to let the zip ties tighten around my rear Pylon.

Redheadd 06-27-2014 11:20 AM

I didn't notch any thug just 2 big zip ties on 1" PVC 15" apart. Oh on one of the location I x 2 zip ties at a crossmember. Held up. Great

scotthons 06-27-2014 1:31 PM

1 Attachment(s)
I just use two bungee cords and call it good.

iShredSAN 06-27-2014 2:52 PM

1 Attachment(s)
2 years ago I went big on the flag similar to the pics above but last year just went out and got a few cheap smaller flags from the dollar store and zip ties em to the tower. Worked and looked great all day! #MURICA!

ktrent 06-28-2014 10:37 AM

be sure to use sch 80 grey pvc. it worked perfect for me. i will try and get some pics later for you.

HushPuff 06-28-2014 1:28 PM

I used the bombwake wakeflag holders, at this point I have 2 which is a bit much at $65 a pop but they are really high quality and you gotta rep' your country...

For the flag pole I used a chimney sweep extension, they sell them at lowes. A small amount of electrical tape helps keep them in the holders tight but I wouldn't hesitate to use them without.

The extensions are nice and flexy, and if you use a pretty thin material flag (i.e. cheap) they are good up to 35 mph.

The fittings on the chimney sweep extensions are NPT so you have to get creative, but zipties and a small fitting does the trick.



Ewok01 06-29-2014 4:32 PM

I ordered a flush mount flag holder and teak flag pole and sewn flag to get this classy look. It's obviously removable for when I pull riders but when cruising to and from the riding spots, or when just cruising, it's flying per the us flag code.


ilikebeaverandboats 06-29-2014 4:35 PM

Just Duct tape it mang, itll all be gravy..... dont overcomplicate it. Zip tie it. or hose clamp it. or find a chick to hold it. or you hold it.

NoNceNse 07-02-2014 3:54 PM

I bought 2 $10 flag poles at Wal-mart and 4 hose clamps. E-bay has all kinds of flags for $5-10 too. http://i29.photobucket.com/albums/c2...20517816_o.jpg

Austinb23 07-02-2014 4:00 PM

2 Attachment(s)
this is ours we want to redo it and move them up higher

tyler97217 07-02-2014 4:55 PM

This post shows me that Skiers Choice owners are much more patriotic than everyone else!!!:D

jonblarc7 07-06-2014 3:29 PM

1 Attachment(s)
Thanks for the idea's guy. Did like you said and zip tied to the back pylon.

jonblarc7 07-06-2014 6:47 PM

1 Attachment(s)
One more

All times are GMT -7. The time now is 10:36 PM.